[lkml]   [2023]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    Subject[PATCH v10 0/9] arm64: j721s2: Add support for additional IPs
    The following series of patches add support for the following
    on J721S2 common processor board,

    - USB
    - SerDes
    - OSPI
    - PCIe

    Changes from v1:
    * Resolve issues with dt schema reporting
    * Minor changes related to consistency on node naming and value

    Changes from v2:
    * Added PCIe RC + EP enablement patchsets
    * Added device-id for j722s2 PCIe host in dt documentation
    * Reworked SERDES + WIZ enablement patchset to use properies for clocks
    defines versus entire devicetree nodes. Results in cleaner code that
    doesn't break dt-schema or the driver functionality.

    Changes from v3:
    * Rebased changes on top of '[PATCH 00/12] TI J7x Disable Incomplete DT Nodes'
    * Removed "dt-bindings: PCI: Add host mode device-id for j721s2 platform" patch and
    send it own series to avoid a dependency that would hold up other patches in this

    Changes from v4:
    * Add my Signed-off-by lines to all patchsets

    Changes from v5:
    * Removed Cc from commit messages to reduce clutter
    * Squashed changes for device tree nodes that get modified latter in the patchset

    Changes from v6:
    * Changes to ti,j721s2-wiz-10g compatible string from ti,am64-wiz-10g but
    requires this series to be merged first
    * Removed unused pcie1_ep based on feedback
    * Switch from incorrect "ti,j721e-system-controller", "syscon", "simple-mfd" compatible for
    SPI node to "simple-bus"

    Changes from v7:
    * Fix node names as per bindings document

    Changes from v8:
    * Update the ti,j721e-system-controller bindings document
    * Fix dtbs warnings

    Changes from v9:
    * Disable nodes in main.dtsi and enable them in the board
    specific DT file

    Aswath Govindraju (7):
    arm64: dts: ti: k3-j721s2-main: Add support for USB
    arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
    arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0
    arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support
    arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes
    arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node
    arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe

    Matt Ranostay (1):
    arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node

    Ravi Gunasekaran (1):
    dt-bindings: mfd: ti,j721e-system-controller: Fix mux node regex

    .../mfd/ti,j721e-system-controller.yaml | 8 +-
    .../dts/ti/k3-j721s2-common-proc-board.dts | 98 ++++++++++++
    arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 147 ++++++++++++++++++
    .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 47 ++++++
    arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 43 +++++
    5 files changed, 342 insertions(+), 1 deletion(-)


     \ /
      Last update: 2023-03-27 00:30    [W:10.510 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site