lkml.org 
[lkml]   [2023]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v5 0/5] Add MAX77541/MAX77540 PMIC Support
    Date
    MFD, regulator and ADC driver and related bindings for MAX77540/MAX77541.
    The patches are required to be applied in sequence.

    Changes in v5:
    * Patch 1: "dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator"
    * Drop compatible properties.
    * Patch 2: "regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support"
    * Change if-else ladder to switch case for chip->id
    * Drop driver_data in platform_device_id
    * Patch 3: "iio: adc: : max77541 Add ADI MAX77541 ADC Support"
    * Drop max77541_adc_iio struct
    * Patch 4: "dt-bindings: mfd: max77541: adi,max77541.yaml Add MAX77541 bindings"
    * Drop allOf
    * Patch 5: "mfd: max77541: Add MAX77541/MAX77540 PMIC Support"
    * Dont use compatible when using MFD_CELL_OF MACRO

    Changes in v4:
    * Patch 1: "dt-bindings: regulator: Add ADI MAX77541/MAX77540 Regulator"
    * NO CHANGE
    * Patch 2: "drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support"
    * Drop OF ID Table
    * Drop driver_data in platform_device_id
    * Patch 3: "drivers: iio: adc: Add ADI MAX77541 ADC Support"
    * Add missing blank line
    * Patch 4: "dt-bindings: mfd: adi,max77541.yaml Add MAX77541 bindings"
    * NO CHANGE(Order of patchset changed, and [4/5] has dependency to [1/5])
    * Patch 5: "drivers: mfd: Add MAX77541/MAX77540 PMIC Support"
    * Use pointers in the driver_data
    * Use probe_new instead of probe
    * Use PLATFORM_DEVID_NONE macro instead of "-1"

    Changes in v3:
    * Patch 1: "drivers: mfd: Add ADI MAX77541/MAX77540 PMIC Support"
    * Change struct name from max77541_dev to max77541
    * Adjust max-line-length lower than 80
    * Patch 2: "dt-bindings: mfd: Add ADI MAX77541/MAX77540"
    * Remove adc object as we do not need
    * Remove adc node from example
    * Patch 3: "drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support"
    * Change node name from "BUCK#_id" to "buck#_id" in regulator desc
    * Patch 4: "dt-bindings: regulator: Add ADI MAX77541/MAX77540 Regulator"
    * Change node name from "BUCK" to "buck" in regulators
    * Patch 5: "drivers: iio: adc: Add ADI MAX77541 ADC Support"
    * Convert voltage values from V to mV for scaling.
    * Convert temperature values from C to miliC for scale and offset
    * Do not set offset bit in info_mask_separate for voltage that does not need offset
    * Remove unnecessary dev_get_drvdata() instead of it use dev_get_regmap to have regmap.
    * Assing hard coded name for adc dev name

    Changes in v2:
    * Patch 1: "drivers: mfd: Add MAX77541/MAX77540 PMIC Support"
    * Drop "this patch adds" from commit message.
    * Drop redundant blank lines.
    * Drop module version
    * Use definition for parameter of devm_mfd_add_devices(.., -1,..)
    * Use desc in chip_info to adding desc for different devices.
    * Add missing headers and forward declarations.
    * Drop unused elements from max77541_dev struct
    * Add chip_info into max77541_dev struct to identify different devices.
    * Patch 2: "dt-bindings: mfd: adi,max77541.yaml Add MAX77541 bindings"
    * Drop "this patch adds" from commit message.
    * Fix $ref path
    * Drop adc part under allOf
    * Keep only one example (more complex one)
    * Fix make dt_binding_check errors.(trailing space, No newline)
    * Patch 3: "drivers: regulator: Add MAX77541 Regulator Support"
    * Drop "this patch adds" from commit message.
    * Add trailing comma for required structs.
    * Fix wrong indentation.
    * Drop redundant blank lines.
    * Drop max77541_regulator_dev struct.
    * Use "regulator_desc *desc" for both regulator
    regarding to "max77541->id"
    * Patch 4: "dt-bindings: regulator: max77541-regulator.yaml Add MAX77541
    Regulator bindings"
    * Drop "this patch adds" from commit message.
    * Chance filename (matching compatible), so adi,max77541-regulator.yaml
    * Fix make dt_binding_check errors.(trailing space, No newline)
    * Patch 5: "drivers: iio: adc: Add MAX77541 ADC Support"
    * Drop "this patch adds" from commit message.
    * Drop redundant blank lines.
    * Fix wrong include path.
    * Use switch instead of if-else for range setting in max77541_adc_scale
    * Move max77541_adc_range enum from max77541.h to here.
    * Use definition from units.h
    * Drop unused elements from max77541_adc_iio struct
    * Drop the .data from platform_device_id

    Okan Sahin (5):
    dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
    regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
    iio: adc: max77541: Add ADI MAX77541 ADC Support
    dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
    mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support

    .../devicetree/bindings/mfd/adi,max77541.yaml | 68 +++++
    .../regulator/adi,max77541-regulator.yaml | 38 +++
    drivers/iio/adc/Kconfig | 11 +
    drivers/iio/adc/Makefile | 1 +
    drivers/iio/adc/max77541-adc.c | 195 ++++++++++++++
    drivers/mfd/Kconfig | 13 +
    drivers/mfd/Makefile | 1 +
    drivers/mfd/max77541.c | 243 ++++++++++++++++++
    drivers/regulator/Kconfig | 9 +
    drivers/regulator/Makefile | 1 +
    drivers/regulator/max77541-regulator.c | 154 +++++++++++
    include/linux/mfd/max77541.h | 102 ++++++++
    12 files changed, 836 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/mfd/adi,max77541.yaml
    create mode 100644 Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml
    create mode 100644 drivers/iio/adc/max77541-adc.c
    create mode 100644 drivers/mfd/max77541.c
    create mode 100644 drivers/regulator/max77541-regulator.c
    create mode 100644 include/linux/mfd/max77541.h

    --
    2.30.2

    \
     
     \ /
      Last update: 2023-03-27 00:29    [W:2.506 / U:0.012 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site