[lkml]   [2023]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v2] usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"
Some boards might use USB-A female connector for USB ports, however,
the port could be connected to a dual-mode USB controller, making it
also behaves as a peripheral device if male-to-male cable is connected.

In this case, the dts looks like this:

&usb0 {
status = "okay";
dr_mode = "otg";
role-switch-default-mode = "host";

After boot, dwc2_ovr_init() sets GOTGCTL to GOTGCTL_AVALOVAL and call
dwc2_force_mode() with parameter host=false, which causes inconsistent
mode - The hardware is in peripheral mode while the kernel status is
in host mode.

What we can do now is to call dwc2_drd_role_sw_set() to switch to
device mode, and everything should work just fine now, even switching
back to none(default) mode afterwards.

Fixes: e14acb876985 ("usb: dwc2: drd: add role-switch-default-node support")
Signed-off-by: Ziyang Huang <>
Changes since v1
- Use corrent name in Signed-off-by

drivers/usb/dwc2/drd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c
index d8d6493bc457..a8605b02115b 100644
--- a/drivers/usb/dwc2/drd.c
+++ b/drivers/usb/dwc2/drd.c
@@ -35,7 +35,8 @@ static void dwc2_ovr_init(struct dwc2_hsotg *hsotg)

spin_unlock_irqrestore(&hsotg->lock, flags);

- dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST));
+ dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST) ||
+ (hsotg->role_sw_default_mode == USB_DR_MODE_HOST));

static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid)
 \ /
  Last update: 2023-03-27 00:29    [W:0.054 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site