lkml.org 
[lkml]   [2023]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] hwmon: (adt7475) Display smoothing attributes in correct order
Date
Throughout the ADT7475 driver, attributes relating to the temperature
sensors are displayed in the order Remote 1, Local, Remote 2. Make
temp_st_show() conform to this expectation so that values set by
temp_st_store() can be displayed using the correct attribute.

Fixes: 8f05bcc33e74 ("hwmon: (adt7475) temperature smoothing")
Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
---
Changes in v2:
- None
drivers/hwmon/adt7475.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 51b3d16c3223..77222c35a38e 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -556,11 +556,11 @@ static ssize_t temp_st_show(struct device *dev, struct device_attribute *attr,
val = data->enh_acoustics[0] & 0xf;
break;
case 1:
- val = (data->enh_acoustics[1] >> 4) & 0xf;
+ val = data->enh_acoustics[1] & 0xf;
break;
case 2:
default:
- val = data->enh_acoustics[1] & 0xf;
+ val = (data->enh_acoustics[1] >> 4) & 0xf;
break;
}

--
2.39.2
\
 
 \ /
  Last update: 2023-03-27 00:31    [W:0.043 / U:1.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site