lkml.org 
[lkml]   [2023]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/2] Support Nvidia BlueField-3 GPIO driver and pin controller
Date
Support the BlueField-3 SoC GPIO driver for handling interrupts and
providing the option to change the direction and value of a GPIO.
Support the BlueField-3 SoC pin controller driver for allowing a
select number of GPIO pins to be manipulated from userspace or
the kernel.

The gpio-mlxbf3.c driver handles hardware registers and logic
that are different from gpio-mlxbf.c and gpio-mlxbf2.c.
For that reason, we have separate drivers for each generation.

Changes from v3->v4:
gpio-mlxbf3.c:
- Update the Kconfig file so that it is conform with checkpatch
- Remove unncessary headers and add missing header inclusions
- Make irq_chip struct static and const
- Replace generic_handle_irq(irq_find_mapping) with
generic_handle_domain_irq
- Simplify logic in irq_set_type
- Replace valid_mask with gpio-reserved-ranges
- Cleanup code

pinctrl-mlxbf.c:
- Cleanup code
- Update the Kconfig file so that it is conform with checkpatch
- Remove unncessary headers and add missing header inclusions

Asmaa Mnebhi (2):
gpio: gpio-mlxbf3: Add gpio driver support
pinctrl: pinctrl-mlxbf: Add pinctrl driver support

drivers/gpio/Kconfig | 12 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-mlxbf3.c | 230 ++++++++++++++++++++++
drivers/pinctrl/Kconfig | 14 ++
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-mlxbf.c | 338 ++++++++++++++++++++++++++++++++
6 files changed, 596 insertions(+)
create mode 100644 drivers/gpio/gpio-mlxbf3.c
create mode 100644 drivers/pinctrl/pinctrl-mlxbf.c

--
2.30.1

\
 
 \ /
  Last update: 2023-03-27 00:27    [W:0.696 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site