lkml.org 
[lkml]   [2023]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: [PATCH v10 3/6] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver
    Date

    On Fri, 17 Feb 2023 12:08:26 +0100, Konrad Dybcio wrote:
    > From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
    >
    > Add the bindings for the CPR3 driver to the documentation.
    >
    > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
    > [Konrad: Make binding check pass; update AGdR's email]
    > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
    > ---
    > .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml | 299 +++++++++++++++++++++
    > 1 file changed, 299 insertions(+)
    >

    My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
    on your patch (DT_CHECKER_FLAGS is new in v5.13):

    yamllint warnings/errors:

    dtschema/dtc warnings/errors:
    /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-1: 'qcom,opp-cloop-vadj', 'qcom,opp-oloop-vadj' do not match any of the regexes: 'pinctrl-[0-9]+'
    From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
    /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-2: 'qcom,opp-cloop-vadj', 'qcom,opp-oloop-vadj' do not match any of the regexes: 'pinctrl-[0-9]+'
    From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
    /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-3: 'qcom,opp-cloop-vadj', 'qcom,opp-oloop-vadj' do not match any of the regexes: 'pinctrl-[0-9]+'
    From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
    /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-3:qcom,opp-fuse-level:0: [2, 3] is too long
    From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml

    doc reference errors (make refcheckdocs):

    See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230217-topic-cpr3h-v10-3-67aed8fdfa61@linaro.org

    The base for the series is generally the latest rc1. A different dependency
    should be noted in *this* patch.

    If you already ran 'make dt_binding_check' and didn't see the above
    error(s), then make sure 'yamllint' is installed and dt-schema is up to
    date:

    pip3 install dtschema --upgrade

    Please check and re-submit after running the above command yourself. Note
    that DT_SCHEMA_FILES can be set to your schema file to speed up checking
    your schema. However, it must be unset to test all examples with your schema.

    \
     
     \ /
      Last update: 2023-03-27 00:26    [W:3.562 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site