lkml.org 
[lkml]   [2023]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] mips: dts: ralink: mt7621: add as CPU port
On Sat, Feb 11, 2023 at 01:49:15PM +0300, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
>
> On MT7621AT, MT7621DAT, and MT7621ST SoCs, port 5 of the MT7530 switch is
> connected to the second MAC of the SoC as a CPU port. Add the port and set
> up the second MAC on the bindings. Revert PHY muxing on GB-PC1.
>
> There's an external PHY connected to the second MAC of the SoC on GB-PC2,
> therefore, disable port@5 for this device.
>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
> .../boot/dts/ralink/mt7621-gnubee-gb-pc1.dts | 16 +++++-----------
> .../boot/dts/ralink/mt7621-gnubee-gb-pc2.dts | 9 ++++++++-
> arch/mips/boot/dts/ralink/mt7621.dtsi | 19 ++++++++++++++++++-
> 3 files changed, 31 insertions(+), 13 deletions(-)

applied to mips-next.

Thomas.

--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]

\
 
 \ /
  Last update: 2023-03-27 00:26    [W:0.054 / U:3.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site