lkml.org 
[lkml]   [2023]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] arm64: dts: qcom: sm8550: Use correct CPU compatibles
Date
Use the correct compatibles for the four kinds of CPU cores used on
SM8550, based on the value of their MIDR_EL1 registers:

CPU7: 0x411fd4e0 - CX3 r1p1
CPU5-6: 0x412fd470 - CA710 r?p?
CPU3-4: 0x411fd4d0 - CA715 r?p?
CPU0-2: 0x411fd461 - CA510 r?p?

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8550.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index ff4d342c0725..a65c3151baf3 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -66,7 +66,7 @@ cpus {

CPU0: cpu@0 {
device_type = "cpu";
- compatible = "qcom,kryo";
+ compatible = "arm,cortex-a510";
reg = <0 0>;
enable-method = "psci";
next-level-cache = <&L2_0>;
@@ -89,7 +89,7 @@ L3_0: l3-cache {

CPU1: cpu@100 {
device_type = "cpu";
- compatible = "qcom,kryo";
+ compatible = "arm,cortex-a510";
reg = <0 0x100>;
enable-method = "psci";
next-level-cache = <&L2_100>;
@@ -108,7 +108,7 @@ L2_100: l2-cache {

CPU2: cpu@200 {
device_type = "cpu";
- compatible = "qcom,kryo";
+ compatible = "arm,cortex-a510";
reg = <0 0x200>;
enable-method = "psci";
next-level-cache = <&L2_200>;
@@ -127,7 +127,7 @@ L2_200: l2-cache {

CPU3: cpu@300 {
device_type = "cpu";
- compatible = "qcom,kryo";
+ compatible = "arm,cortex-a715";
reg = <0 0x300>;
enable-method = "psci";
next-level-cache = <&L2_300>;
@@ -146,7 +146,7 @@ L2_300: l2-cache {

CPU4: cpu@400 {
device_type = "cpu";
- compatible = "qcom,kryo";
+ compatible = "arm,cortex-a715";
reg = <0 0x400>;
enable-method = "psci";
next-level-cache = <&L2_400>;
@@ -165,7 +165,7 @@ L2_400: l2-cache {

CPU5: cpu@500 {
device_type = "cpu";
- compatible = "qcom,kryo";
+ compatible = "arm,cortex-a710";
reg = <0 0x500>;
enable-method = "psci";
next-level-cache = <&L2_500>;
@@ -184,7 +184,7 @@ L2_500: l2-cache {

CPU6: cpu@600 {
device_type = "cpu";
- compatible = "qcom,kryo";
+ compatible = "arm,cortex-a710";
reg = <0 0x600>;
enable-method = "psci";
next-level-cache = <&L2_600>;
@@ -203,7 +203,7 @@ L2_600: l2-cache {

CPU7: cpu@700 {
device_type = "cpu";
- compatible = "qcom,kryo";
+ compatible = "arm,cortex-x3";
reg = <0 0x700>;
enable-method = "psci";
next-level-cache = <&L2_700>;
--
2.39.1
\
 
 \ /
  Last update: 2023-03-27 00:25    [W:0.042 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site