lkml.org 
[lkml]   [2023]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/4] ARM: dts: qcom: ipq4018-ap120c-ac: align GPIO hog with DT schema
On Thu, Feb 16, 2023 at 11:48 AM Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
>
>
> On 14.02.2023 17:12, Robert Marko wrote:
> > Align USB power GPIO hog node to DT schema.
> >
> > Signed-off-by: Robert Marko <robert.marko@sartura.hr>
> > ---
> Unless you submitted a separate patch for this, I only see
> hog being allowed in 845 TLMM.

No, cause there is a gpio-hog schema in dtschema and I did not
even look into the pinctrl bindings and dtbs_check is not throwing
a warning.

I dont really see a point further allowing it in pinctrl bindings.

Regards,
Robert
>
> Konrad
> > arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
> > index 38efd45433da5..cd2a32d0d5548 100644
> > --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
> > +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
> > @@ -76,7 +76,7 @@ mux_cs {
> > };
> > };
> >
> > - usb-power {
> > + usb-power-hog {
> > line-name = "USB-power";
> > gpios = <1 GPIO_ACTIVE_HIGH>;
> > gpio-hog;



--
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@sartura.hr
Web: www.sartura.hr

\
 
 \ /
  Last update: 2023-03-27 00:25    [W:0.093 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site