lkml.org 
[lkml]   [2023]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 3/6] Documentation: cpufreq: amd-pstate: Move amd_pstate param to alphabetical order
Date
Move amd_pstate command line param description to correct alphabetical
order.

Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
---
.../admin-guide/kernel-parameters.txt | 35 ++++++++++---------
1 file changed, 18 insertions(+), 17 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index e3618dfdb36a..6ffcfb73e62f 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -339,6 +339,24 @@
This mode requires kvm-amd.avic=1.
(Default when IOMMU HW support is present.)

+ amd_pstate= [X86]
+ disable
+ Do not enable amd_pstate as the default
+ scaling driver for the supported processors
+ passive
+ Use amd_pstate as a scaling driver, driver requests a
+ desired performance on this abstract scale and the power
+ management firmware translates the requests into actual
+ hardware states (core frequency, data fabric and memory
+ clocks etc.)
+ active
+ Use amd_pstate_epp driver instance as the scaling driver,
+ driver provides a hint to the hardware if software wants
+ to bias toward performance (0x0) or energy efficiency (0xff)
+ to the CPPC firmware. then CPPC power algorithm will
+ calculate the runtime workload and adjust the realtime cores
+ frequency.
+
amijoy.map= [HW,JOY] Amiga joystick support
Map of devices attached to JOY0DAT and JOY1DAT
Format: <a>,<b>
@@ -7010,20 +7028,3 @@
xmon commands.
off xmon is disabled.

- amd_pstate= [X86]
- disable
- Do not enable amd_pstate as the default
- scaling driver for the supported processors
- passive
- Use amd_pstate as a scaling driver, driver requests a
- desired performance on this abstract scale and the power
- management firmware translates the requests into actual
- hardware states (core frequency, data fabric and memory
- clocks etc.)
- active
- Use amd_pstate_epp driver instance as the scaling driver,
- driver provides a hint to the hardware if software wants
- to bias toward performance (0x0) or energy efficiency (0xff)
- to the CPPC firmware. then CPPC power algorithm will
- calculate the runtime workload and adjust the realtime cores
- frequency.
--
2.34.1
\
 
 \ /
  Last update: 2023-03-27 00:25    [W:0.078 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site