lkml.org 
[lkml]   [2023]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [PATCH 2/3] arm64: dts: qcom: qdu1000-idp: Enable mpss
    From
    On 13/02/2023 21:01, Melody Olvera wrote:
    > Add MPSS firmware paths for the QDU1000 IDP platform.
    >
    > Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
    > ---
    > arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 6 ++++++
    > 1 file changed, 6 insertions(+)
    >
    > diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
    > index 9e9fd4b8023e..2b89814c67d6 100644
    > --- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
    > +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
    > @@ -448,6 +448,12 @@ &qupv3_id_0 {
    > status = "okay";
    > };
    >
    > +&remoteproc_mpss {
    > + firmware-name = "modem.mdt",
    > + "modem_dtb.mdt";

    Please follow the other platforms for the firmware names:
    "qcom/<SoC>/<name>.mbn if the device in not fused for the particular set
    of keys and "qcom/<SoC>/<vendor>/<device>/<name>.mbn" if the device is
    fused.

    > + status = "okay";
    > +};
    > +
    > &uart7 {
    > status = "okay";
    > };

    --
    With best wishes
    Dmitry

    \
     
     \ /
      Last update: 2023-03-27 00:21    [W:3.851 / U:0.060 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site