Messages in this thread Patch in this message | | | From | arinc9.unal@gmail ... | Subject | [PATCH v3 4/5] arm: dts: mt7623: enable flow control on | Date | Fri, 10 Feb 2023 21:25:04 +0300 |
| |
From: Arınç ÜNAL <arinc.unal@arinc9.com>
Flow control needs to be enabled on both sides to work. It is already enabled on gmac0, enable it on port@6 too.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> --- arch/arm/boot/dts/mt7623a.dtsi | 1 + arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 1 + 2 files changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi index dd522e508eb3..2a50b5c0c933 100644 --- a/arch/arm/boot/dts/mt7623a.dtsi +++ b/arch/arm/boot/dts/mt7623a.dtsi @@ -88,6 +88,7 @@ port@6 { fixed-link { speed = <1000>; full-duplex; + pause; }; }; }; diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts index 6b0c3d1006ab..34994f3f5a4b 100644 --- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts +++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts @@ -230,6 +230,7 @@ port@6 { fixed-link { speed = <1000>; full-duplex; + pause; }; }; }; -- 2.37.2
| |