lkml.org 
[lkml]   [2023]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH v3 2/4] mips: dts: ralink: mt7621: add phandle to system controller node for watchdog
From
Could you also change the node name to watchdog@100? make dtbs_check 
points it out:

wdt@100: $nodename:0: 'wdt@100' does not match '^watchdog(@.*|-[0-9a-f])?$'

Thanks.
Arınç

On 10.02.2023 20:38, Sergio Paracuellos wrote:
> To allow to access system controller registers from watchdog driver code
> add a phandle in the watchdog 'wdt' node. This avoid using arch dependent
> operations in driver code.
>
> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> ---
> arch/mips/boot/dts/ralink/mt7621.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
> index 5ca40fd21..764916eaf 100644
> --- a/arch/mips/boot/dts/ralink/mt7621.dtsi
> +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
> @@ -73,6 +73,7 @@ sysc: syscon@0 {
> wdt: wdt@100 {
> compatible = "mediatek,mt7621-wdt";
> reg = <0x100 0x100>;
> + mediatek,sysctl = <&sysc>;
> };
>
> gpio: gpio@600 {

\
 
 \ /
  Last update: 2023-03-27 00:18    [W:0.112 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site