lkml.org 
[lkml]   [2023]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 3/6] ARM: dts: imx6dl-yapp4: Use reset-gpios property name
    Date
    Use the gpios instead of gpio suffix that is mandated by the binding.
    This dtbs_check warning is fixed now:

    touchscreen@5c: Unevaluated properties are not allowed ('reset-gpio' was unexpected)

    The reset signal worked correctly as both the "gpio" and "gpios" suffixes
    are actually allowed by the gpiolib.

    Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
    ---
    arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 2 +-
    1 file changed, 1 insertion(+), 1 deletion(-)

    diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
    index aacbf317feea..c6afc51bb22b 100644
    --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
    +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
    @@ -313,7 +313,7 @@ touchscreen: touchscreen@5c {
    interrupt-parent = <&gpio4>;
    interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
    attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
    - reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
    + reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
    touchscreen-size-x = <800>;
    touchscreen-size-y = <480>;
    status = "disabled";
    --
    2.25.1
    \
     
     \ /
      Last update: 2023-03-27 00:18    [W:5.119 / U:0.072 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site