Messages in this thread | | | Date | Fri, 10 Feb 2023 11:56:18 +0530 | Subject | Re: [EXTERNAL] Re: [EXTERNAL] Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v4 2/2] net: ti: icssg-prueth: Add ICSSG ethernet driver | From | Md Danish Anwar <> |
| |
On 09/02/23 19:24, Andrew Lunn wrote: >> Sure, I'll do that. In the list of all phy modes described in [1], I can only >> see phy-mode "rgmii-txid", for which we can return -EINVAL. Is there any other >> phy-mode that requires enabling/disabling TX internal delays? Please let me >> know if any other phy-mode also needs this. I will add check for that as well. > > There are 4 phy-modes for RGMII. > > rgmii, rgmii-id, rmgii-rxid, rgmii-txid. > > rgmii-id, rgmii-txid both require TX delays. If you do that in the MAC > you then need to pass rgmii-rxid and rgmii to the PHY respectively. > > rmii and rgmii-rxid requires no TX delays, which your SoC cannot do, > so you need to return -EINVAl, > > The interpretation of these properties is all really messy and > historically not very uniformly done. Which is why i recommend the MAC > does nothing, leaving it to the PHY. That generally works since the > PHYs have a pretty uniform implementation. But in your case, you don't > have that option. So i suggest you do what is described above. > > Andrew
Sure Andrew, I will post new revision with the changes described above.
-- Thanks and Regards, Danish.
| |