lkml.org 
[lkml]   [2023]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 4/4] riscv: dts: starfive: Add dphy rx node
Date
Add dphy rx node for the Starfive JH7110 SoC. It use to transfer the CSI
cameras data.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
arch/riscv/boot/dts/starfive/jh7110.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index bce3e407ab60..bdd7b672fd94 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -488,5 +488,18 @@ voutcrg: clock-controller@295C0000 {
#reset-cells = <1>;
power-domains = <&pwrc JH7110_PD_VOUT>;
};
+
+ csi_phy: dphy@19820000 {
+ compatible = "starfive,jh7110-dphy-rx";
+ reg = <0x0 0x19820000 0x0 0x10000>;
+ clocks = <&ispcrg JH7110_ISPCLK_M31DPHY_CFGCLK_IN>,
+ <&ispcrg JH7110_ISPCLK_M31DPHY_REFCLK_IN>,
+ <&ispcrg JH7110_ISPCLK_M31DPHY_TXCLKESC_LAN0>;
+ clock-names = "cfg", "ref", "tx";
+ resets = <&ispcrg JH7110_ISPRST_M31DPHY_HW>,
+ <&ispcrg JH7110_ISPRST_M31DPHY_B09_ALWAYS_ON>;
+ starfive,aon-syscon = <&aon_syscon 0x00>;
+ #phy-cells = <0>;
+ };
};
};
--
2.25.1
\
 
 \ /
  Last update: 2023-03-27 00:17    [W:0.096 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site