lkml.org 
[lkml]   [2023]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe:Re: [v3 5/6] drm/vs: Add hdmi driver




Hi Keith:











At 2023-12-06 22:11:33, "Keith Zhao" <keith.zhao@starfivetech.com> wrote:
>
>
>On 2023/12/6 20:56, Maxime Ripard wrote:
>> On Wed, Dec 06, 2023 at 08:02:55PM +0800, Keith Zhao wrote:
>>> >> +static const struct of_device_id starfive_hdmi_dt_ids[] = {
>>> >> + { .compatible = "starfive,jh7110-inno-hdmi",},
>>> >
>>> > So it's inno hdmi, just like Rockchip then?
>>> >
>>> > This should be a common driver.
>>>
>>> Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
>>> but the harewawre difference of them is big , it is not easy to use the common driver
>>> maybe i need the inno hdmi version here to make a distinction
>>
>> I just had a look at the rockchip header file: all the registers but the
>> STARFIVE_* ones are identical.
>>
>> There's no need to have two identical drivers then, please use the
>> rockchip driver instead.
>>
>> Maxime
>
>ok, have a simple test , edid can get . i will continue

Maybe you can take drivers/gpu/drm/bridge/synopsys/dw-hdmi as a reference, this
is also a hdmi ip used by rockchip/meson/sunxi/jz/imx。
We finally make it share one driver。
>
>
>_______________________________________________
>linux-riscv mailing list
>linux-riscv@lists.infradead.org
>http://lists.infradead.org/mailman/listinfo/linux-riscv
\
 
 \ /
  Last update: 2023-12-07 10:22    [W:2.449 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site