lkml.org 
[lkml]   [2023]   [Dec]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/1] mmc: core: Add HS400 tuning in HS400es initialization
Date
During the initialization to HS400es stage, add hs400 tuning flow as an
optional process. For Mediatek IP, HS00es mode requires a specific
tuning to ensure the correct HS400 timing setting.

Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.com>
---
v1 https://patchwork.kernel.org/project/linux-mediatek/patch/20231201030547.11553-1-mengqi.zhang@mediatek.com/
v2 https://patchwork.kernel.org/project/linux-mediatek/patch/20231222062236.26370-1-mengqi.zhang@mediatek.com/
---
drivers/mmc/core/mmc.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 705942edacc6..d5173a9bb4b0 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1822,8 +1822,13 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,

if (err)
goto free_card;
-
- } else if (!mmc_card_hs400es(card)) {
+ } else if (mmc_card_hs400es(card)) {
+ if (host->ops->execute_hs400_tuning) {
+ err = host->ops->execute_hs400_tuning(host, card);
+ if (err)
+ goto free_card;
+ }
+ } else {
/* Select the desired bus width optionally */
err = mmc_select_bus_width(card);
if (err > 0 && mmc_card_hs(card)) {
--
2.25.1

\
 
 \ /
  Last update: 2023-12-25 10:40    [W:0.988 / U:0.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site