lkml.org 
[lkml]   [2023]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH RFC v2 08/11] scsi: ufs: core: Perform read back after disabling interrupts
Currently, interrupts are cleared and disabled prior to registering the
interrupt. An mb() is used to complete the clear/disable writes before
the interrupt is registered.

mb() ensure that the write completes, but completion doesn't mean that
it isn't stored in a buffer somewhere. The recommendation for
ensuring these bits have taken effect on the device is to perform a read
back to force it to make it all the way to the device. This is
documented in device-io.rst and a talk by Will Deacon on this can
be seen over here:

https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678

Let's do that to ensure these bits hit the device. Because the mb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed
by writel()/readl()), it can safely be removed.

Fixes: 199ef13cac7d ("scsi: ufs: avoid spurious UFS host controller interrupts")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---
drivers/ufs/core/ufshcd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 7bfb556e5b8e..bb603769b029 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -10568,7 +10568,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
* Make sure that UFS interrupts are disabled and any pending interrupt
* status is cleared before registering UFS interrupt handler.
*/
- mb();
+ ufshcd_readl(hba, REG_INTERRUPT_ENABLE);

/* IRQ registration */
err = devm_request_irq(dev, irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba);
--
2.43.0


\
 
 \ /
  Last update: 2023-12-21 19:28    [W:0.052 / U:1.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site