lkml.org 
[lkml]   [2023]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 5/5] dt-bindings: net: ipq4019-mdio: Document ipq5332 platform
From


On 12/15/2023 8:14 PM, Krzysztof Kozlowski wrote:
> On 15/12/2023 13:03, Jie Luo wrote:
>>>> If i do not declare the property "reset-assert-us" and
>>>> "reset-deassert-us", the warning will be reported by "make
>>>> dt_binding_check" since i
>>>> add a example in this file.
>>>
>>> This argument does not make sense, sorry. Obviously if property is not
>>> allowed, it should be removed.
>>>
>>> Provide rationale, in terms of hardware, why this property must be added
>>> and why it cannot be deduced from the compatible.
>>>
>>> Best regards,
>>> Krzysztof
>>>
>>
>> So i can remove "reset-assert-us" and "reset-deassert-us" from the added
>> example to avoid the dt check warning? even these two properties are
>> needed to be defined in the device tree to make this driver working
>> correctly.
>
> Sorry, that does not answer my question at all. First, "Driver" is not
> hardware. My second question was simply ignored. In the v2 thread you as
> well respond with some short, unrelated sentences not answering to the
> real questions. It's a waste of my time. Please reach internally in
> Qualcomm for guidance how to upstream patches and how to write bindings.
>
> Best regards,
> Krzysztof
>

These properties "reset-assert-us" and "reset-deassert-us" are the
general properties from mdio.yaml, which are used when the MDIO
bus driver is registered by the MDIO framework.
The general DT property already supports to do the correct config,
then compatible string is not needed to be checked for doing the
configs.

i will check the binding examples to avoid this kind of problems.


\
 
 \ /
  Last update: 2023-12-15 13:57    [W:0.047 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site