lkml.org 
[lkml]   [2023]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 2/3] phy: qcom-qmp-pcie: Add endpoint refclk control register offset
From

On 11/9/2023 3:15 PM, Dmitry Baryshkov wrote:
> On Thu, 9 Nov 2023 at 11:36, Krishna Chaitanya Chundru
> <quic_krichai@quicinc.com> wrote:
>>
>> On 11/7/2023 6:36 PM, Dmitry Baryshkov wrote:
>>> On Tue, 7 Nov 2023 at 14:26, Krishna chaitanya chundru
>>> <quic_krichai@quicinc.com> wrote:
>>>> Some platforms needs to keep endpoint refclk always on, for this
>>>> purpose add this offset for all the applicable phy versions.
>>>>
>>>> And also add reg layout for few controllers as we are adding
>>>> endpoint refclk control register which changes based upon phy version.
>>>>
>>>> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
>>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>>>
>>>> ---
>>>> drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 26 +++++++++++++++++++---
>>>> drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h | 1 +
>>>> drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h | 1 +
>>>> drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h | 1 +
>>>> 4 files changed, 26 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
>>>> index a63ca7424974..74d03d217ff2 100644
>>>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
>>>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
>>>> @@ -77,6 +77,7 @@ enum qphy_reg_layout {
>>>> QPHY_START_CTRL,
>>>> QPHY_PCS_STATUS,
>>>> QPHY_PCS_POWER_DOWN_CONTROL,
>>>> + QPHY_PCS_ENDPOINT_REFCLK_CNTRL,
>>>> /* Keep last to ensure regs_layout arrays are properly initialized */
>>>> QPHY_LAYOUT_SIZE
>>>> };
>>>> @@ -93,6 +94,7 @@ static const unsigned int pciephy_v3_regs_layout[QPHY_LAYOUT_SIZE] = {
>>>> [QPHY_START_CTRL] = QPHY_V3_PCS_START_CONTROL,
>>>> [QPHY_PCS_STATUS] = QPHY_V3_PCS_PCS_STATUS,
>>>> [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V3_PCS_POWER_DOWN_CONTROL,
>>>> + [QPHY_PCS_ENDPOINT_REFCLK_CNTRL] = QPHY_V3_PCS_ENDPOINT_REFCLK_CNTRL,
>>>> };
>>>>
>>>> static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
>>>> @@ -107,6 +109,7 @@ static const unsigned int pciephy_v4_regs_layout[QPHY_LAYOUT_SIZE] = {
>>>> [QPHY_START_CTRL] = QPHY_V4_PCS_START_CONTROL,
>>>> [QPHY_PCS_STATUS] = QPHY_V4_PCS_PCS_STATUS1,
>>>> [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V4_PCS_POWER_DOWN_CONTROL,
>>>> + [QPHY_PCS_ENDPOINT_REFCLK_CNTRL] = QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_CNTRL,
>>>> };
>>>>
>>>> static const unsigned int pciephy_v5_regs_layout[QPHY_LAYOUT_SIZE] = {
>>>> @@ -114,6 +117,23 @@ static const unsigned int pciephy_v5_regs_layout[QPHY_LAYOUT_SIZE] = {
>>>> [QPHY_START_CTRL] = QPHY_V5_PCS_START_CONTROL,
>>>> [QPHY_PCS_STATUS] = QPHY_V5_PCS_PCS_STATUS1,
>>>> [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V5_PCS_POWER_DOWN_CONTROL,
>>>> + [QPHY_PCS_ENDPOINT_REFCLK_CNTRL] = QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_CNTRL,
>>>> +};
>>>> +
>>>> +static const unsigned int pciephy_v5_20_regs_layout[QPHY_LAYOUT_SIZE] = {
>>>> + [QPHY_SW_RESET] = QPHY_V5_PCS_SW_RESET,
>>>> + [QPHY_START_CTRL] = QPHY_V5_PCS_START_CONTROL,
>>>> + [QPHY_PCS_STATUS] = QPHY_V5_PCS_PCS_STATUS1,
>>>> + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V5_PCS_POWER_DOWN_CONTROL,
>>> Nit: we should probably define V5_20 and v6_20 versions of these registers
>> We don't have separate defines for v5_20 and v6_20 for these registers,
>> that is why we are using these.
>>
>> And the offsets are same for those version. That is why I tried to use
>> macros.
> Mixing versions in a single table can quickly lead to a disaster.

I will add then in the next series.

- Krishna Chaitanya

>> - Krishna Chaitanya.
>>
>>> If you were to send v3 for any reason, could you please add them?
>>>
>>>> + [QPHY_PCS_ENDPOINT_REFCLK_CNTRL] = QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_CNTRL,
>>>> +};
>>>> +
>>>> +static const unsigned int pciephy_v6_20_regs_layout[QPHY_LAYOUT_SIZE] = {
>>>> + [QPHY_SW_RESET] = QPHY_V5_PCS_SW_RESET,
>>>> + [QPHY_START_CTRL] = QPHY_V5_PCS_START_CONTROL,
>>>> + [QPHY_PCS_STATUS] = QPHY_V5_PCS_PCS_STATUS1,
>>>> + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V5_PCS_POWER_DOWN_CONTROL,
>>>> + [QPHY_PCS_ENDPOINT_REFCLK_CNTRL] = QPHY_PCIE_V6_20_PCS_ENDPOINT_REFCLK_CNTRL,
>>>> };
>>>>
>>>> static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
>>>> @@ -2956,7 +2976,7 @@ static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
>>>> .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
>>>> .vreg_list = qmp_phy_vreg_l,
>>>> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
>>>> - .regs = pciephy_v5_regs_layout,
>>>> + .regs = pciephy_v5_20_regs_layout,
>>>>
>>>> .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
>>>> .phy_status = PHYSTATUS_4_20,
>>>> @@ -3012,7 +3032,7 @@ static const struct qmp_phy_cfg sm8550_qmp_gen4x2_pciephy_cfg = {
>>>> .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
>>>> .vreg_list = sm8550_qmp_phy_vreg_l,
>>>> .num_vregs = ARRAY_SIZE(sm8550_qmp_phy_vreg_l),
>>>> - .regs = pciephy_v5_regs_layout,
>>>> + .regs = pciephy_v6_20_regs_layout,
>>>>
>>>> .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
>>>> .phy_status = PHYSTATUS_4_20,
>>>> @@ -3047,7 +3067,7 @@ static const struct qmp_phy_cfg sa8775p_qmp_gen4x2_pciephy_cfg = {
>>>> .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
>>>> .vreg_list = qmp_phy_vreg_l,
>>>> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
>>>> - .regs = pciephy_v5_regs_layout,
>>>> + .regs = pciephy_v5_20_regs_layout,
>>>>
>>>> .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
>>>> .phy_status = PHYSTATUS_4_20,
>>>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h
>>>> index a469ae2a10a1..9b166286afda 100644
>>>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h
>>>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h
>>>> @@ -11,6 +11,7 @@
>>>> #define QPHY_V5_PCS_PCIE_POWER_STATE_CONFIG2 0x0c
>>>> #define QPHY_V5_PCS_PCIE_POWER_STATE_CONFIG4 0x14
>>>> #define QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE 0x20
>>>> +#define QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_CNTRL 0x24
>>>> #define QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1 0x54
>>>> #define QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS 0x94
>>>> #define QPHY_V5_PCS_PCIE_EQ_CONFIG2 0xa8
>>>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h
>>>> index cdf8c04ea078..8b114e538a07 100644
>>>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h
>>>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h
>>>> @@ -9,6 +9,7 @@
>>>> /* Only for QMP V5_20 PHY - PCIe PCS registers */
>>>> #define QPHY_V5_20_PCS_PCIE_POWER_STATE_CONFIG2 0x00c
>>>> #define QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE 0x01c
>>>> +#define QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_CNTRL 0x020
>>>> #define QPHY_V5_20_PCS_PCIE_OSC_DTCT_MODE2_CONFIG5 0x084
>>>> #define QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS 0x090
>>>> #define QPHY_V5_20_PCS_PCIE_EQ_CONFIG1 0x0a0
>>>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
>>>> index e3eb08776339..f7abe95c49ad 100644
>>>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
>>>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
>>>> @@ -10,6 +10,7 @@
>>>> #define QPHY_PCIE_V6_20_PCS_POWER_STATE_CONFIG2 0x00c
>>>> #define QPHY_PCIE_V6_20_PCS_TX_RX_CONFIG 0x018
>>>> #define QPHY_PCIE_V6_20_PCS_ENDPOINT_REFCLK_DRIVE 0x01c
>>>> +#define QPHY_PCIE_V6_20_PCS_ENDPOINT_REFCLK_CNTRL 0x020
>>>> #define QPHY_PCIE_V6_20_PCS_OSC_DTCT_ATCIONS 0x090
>>>> #define QPHY_PCIE_V6_20_PCS_EQ_CONFIG1 0x0a0
>>>> #define QPHY_PCIE_V6_20_PCS_EQ_CONFIG5 0x108
>>>>
>>>> --
>>>> 2.42.0
>>>>
>>>>
>
>

\
 
 \ /
  Last update: 2023-11-20 13:53    [W:0.043 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site