lkml.org 
[lkml]   [2023]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] i2c: designware: Disable TX_EMPTY irq while waiting for block length byte
On Thu, Nov 02, 2023 at 10:30:08AM +0700, Tam Nguyen wrote:
> During SMBus block data read process, we have seen high interrupt rate
> because of TX_EMPTY irq status while waiting for block length byte (the
> first data byte after the address phase). The interrupt handler does not
> do anything because the internal state is kept as STATUS_WRITE_IN_PROGRESS.
> Hence, we should disable TX_EMPTY IRQ until I2C DesignWare receives
> first data byte from I2C device, then re-enable it to resume SMBus
> transaction.
>
> It takes 0.789 ms for host to receive data length from slave.
> Without the patch, i2c_dw_isr() is called 99 times by TX_EMPTY interrupt.
> And it is none after applying the patch.
>
> Cc: stable@vger.kernel.org
> Co-developed-by: Chuong Tran <chuong@os.amperecomputing.com>
> Signed-off-by: Chuong Tran <chuong@os.amperecomputing.com>
> Signed-off-by: Tam Nguyen <tamnguyenchi@os.amperecomputing.com>

Applied to for-current, thanks!

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2023-11-20 13:52    [W:0.056 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site