lkml.org 
[lkml]   [2023]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] Kconfig: eliminate abnormal characters displayed under menuconfig
From
Hi,

On 10/6/23 13:29, Bjorn Helgaas wrote:
> On Tue, Aug 02, 2022 at 06:12:33PM +0800, Liu Song wrote:
>> From: Liu Song <liusong@linux.alibaba.com>
>>
>> Use "find ./linux/* | grep Kconfig | xargs file | grep UTF", can find
>> files with utf-8 encoded characters, these files will display garbled
>> characters in menuconfig, except for characters with special meanings
>> that cannot be modified, modify the characters with obvious errors to
>> eliminate the wrong display under meunconfig.

Same problems exist in 'nconfig'.

(more below)

>>
>> Signed-off-by: Liu Song <liusong@linux.alibaba.com>
>> Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
>> Acked-by: Randy Dunlap <rdunlap@infradead.org>
>> Tested-by: Randy Dunlap <rdunlap@infradead.org>
>> ---
>> arch/Kconfig | 2 +-
>> drivers/pci/Kconfig | 2 +-
>> net/netfilter/ipvs/Kconfig | 8 ++++----
>> 3 files changed, 6 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/Kconfig b/arch/Kconfig
>> index 5ea3e38..2462337 100644
>> --- a/arch/Kconfig
>> +++ b/arch/Kconfig
>> @@ -745,7 +745,7 @@ config CFI_CLANG
>> depends on CLANG_VERSION >= 140000
>> select KALLSYMS
>> help
>> - This option enables Clang’s forward-edge Control Flow Integrity
>> + This option enables Clang's forward-edge Control Flow Integrity
>
> Menuconfig renders as "Clang ~@~Ys forward-edge", so this really
> should be fixed.
>
>> (CFI) checking, where the compiler injects a runtime check to each
>> indirect function call to ensure the target is a valid function with
>> the correct static type. This restricts possible call targets and
>> diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
>> index 133c732..8102b78 100644
>> --- a/drivers/pci/Kconfig
>> +++ b/drivers/pci/Kconfig
>> @@ -166,7 +166,7 @@ config PCI_P2PDMA
>> depends on ZONE_DEVICE
>> select GENERIC_ALLOCATOR
>> help
>> - Enableѕ drivers to do PCI peer-to-peer transactions to and from
>> + Enables drivers to do PCI peer-to-peer transactions to and from
>
> I applied this one by itself to the PCI tree.
>
>> diff --git a/net/netfilter/ipvs/Kconfig b/net/netfilter/ipvs/Kconfig
>> index 271da84..06b9066 100644
>> --- a/net/netfilter/ipvs/Kconfig
>> +++ b/net/netfilter/ipvs/Kconfig
>> @@ -308,10 +308,10 @@ config IP_VS_MH_TAB_INDEX
>> stored in a hash table. This table is assigned by a preference
>> list of the positions to each destination until all slots in
>> the table are filled. The index determines the prime for size of
>> - the table as 251, 509, 1021, 2039, 4093, 8191, 16381, 32749,
>> - 65521 or 131071. When using weights to allow destinations to
>> - receive more connections, the table is assigned an amount
>> - proportional to the weights specified. The table needs to be large
>> + the table as 251, 509, 1021, 2039, 4093, 8191, 16381, 32749,
>> + 65521 or 131071. When using weights to allow destinations to
>> + receive more connections, the table is assigned an amount
>> + proportional to the weights specified. The table needs to be large
>
> Menuconfig renders this one fine either way, as far as I can tell.
> It contains several "c2a0" (UTF-8 non-breaking space) characters:
>
> 00000180: 660a 0920 2074 6865 2074 6162 6c65 2061 f.. the table a
> 00000190: 73c2 a032 3531 2c20 3530 392c 2031 3032 s..251, 509, 102
> ^^ ^^
> 000001a0: 312c 2032 3033 392c 2034 3039 332c 2038 1, 2039, 4093, 8
> 000001b0: 3139 312c 2031 3633 3831 2c20 3332 3734 191, 16381, 3274
> 000001c0: 392c 0a09 2020 3635 3532 3120 6f72 2031 9,.. 65521 or 1
> 000001d0: 3331 3037 312e c2a0 5768 656e 2075 7369 31071...When usi
> ^^^^
> 000001e0: 6e67 2077 6569 6768 7473 2074 6f20 616c ng weights to al
> 000001f0: 6c6f 7720 6465 7374 696e 6174 696f 6e73 low destinations
> 00000200: 2074 6f0a 0920 2072 6563 6569 7665 206d to.. receive m
> 00000210: 6f72 6520 636f 6e6e 6563 7469 6f6e 732c ore connections,
> 00000220: c2a0 7468 6520 7461 626c 6520 6973 2061 ..the table is a
> ^^^^
> 00000230: 7373 6967 6e65 6420 616e 2061 6d6f 756e ssigned an amoun
> 00000240: 740a 0920 2070 726f 706f 7274 696f 6e61 t.. proportiona
> 00000250: 6c20 746f 2074 6865 2077 6569 6768 7473 l to the weights
> 00000260: 2073 7065 6369 6669 6564 2ec2 a054 6865 specified...The
> ^^ ^^
>
>
> There are a few more ugly ones:
>
> $ find * -name Kconfig\* | xargs grep --color -rIP "[^[:ascii:]]"
> crypto/Kconfig: an ε-almost-∆-universal hash function, and an invocation of
>
> CRYPTO_ADIANTUM
> Renders as "an -almost- ~H~F-universal hash function"
>
> drivers/mtd/nand/raw/Kconfig: tristate "OLPC CAFÉ NAND controller"
> drivers/mtd/nand/raw/Kconfig: Use NAND flash attached to the CAFÉ chip designed for the OLPC
>
> MTD_NAND_CAFE
> Renders as "OLPC CAF ~I NAND controller".
>
> drivers/mtd/spi-nor/Kconfig: 64 KiB block instead of 16 × 4 KiB sectors.
>
> Renders as "64 KiB block instead of 16 ~W 4 KiB sectors."
>
> drivers/net/can/usb/Kconfig:from Theobroma Systems like the A31-µQ7 and the RK3399-Q7
>
> CAN_UCAN
> Renders as "from Theobroma Systems like the A31- Q7 and the RK3399-Q7"
>
> drivers/net/can/peak_canfd/Kconfig: operated with ambient temperatures in a range of -40 to +85 °C.
>
> CAN_PEAK_PCIEFD
> Renders as "operated with ambient temperatures in a range of -40 to
> +85 C."
>
> drivers/gpu/drm/panel/Kconfig: The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
>
> DRM_PANEL_JDI_LT070ME05000
> Renders as "The panel has a 1200(RGB) ~W1920 (WUXGA) resolution"
>
> drivers/gpu/drm/panel/Kconfig: panel module. The panel has a 1024×600 resolution and uses
>
> DRM_PANEL_TDO_TL070WSH30
> Renders as "panel module. The panel has a 1024 ~W600 resolution"
>
> drivers/platform/mellanox/Kconfig: The processor used on SN2201 is Intel Atom®Processor C Series,
>
> CONFIG_NVSW_SN2201
> Renders as "The processor used on SN2201 is Intel Atom Processor C Series,"
> (Not terrible, just an extra space, but lost the (R))
>
> drivers/platform/mellanox/Kconfig: System equipped with Nvidia®Spectrum-1 32x100GbE Ethernet switch.
>
> Also CONFIG_NVSW_SN2201
> Renders as "System equipped with Nvidia Spectrum-1 32x100GbE Ethernet switch."
> (Again, just an extra space but lost the (R))
>
> kernel/time/Kconfig: int "Clocksource watchdog maximum allowable skew (in μs)"
>
> CLOCKSOURCE_WATCHDOG_MAX_SKEW_US
> Renders as "Clocksource watchdog maximum allowable skew (in s)"
> Clearly wrong.

I have verified all of these comments that Bjorn made (just checking :).

Is there some world where these characters display correctly?

(other than in gconfig & xconfig -- they have no problems with these characters)

thanks.
--
~Randy

\
 
 \ /
  Last update: 2023-11-20 13:53    [W:0.755 / U:1.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site