Messages in this thread | | | Date | Tue, 7 Nov 2023 10:41:13 +0000 | Subject | Re: [RFC 2/8] usb: dwc3: core: Register vendor hooks for dwc3-qcom | From | Bryan O'Donoghue <> |
| |
On 07/11/2023 08:33, Krishna Kurapati PSSNV wrote: > > > On 11/4/2023 10:32 PM, Krishna Kurapati PSSNV wrote: >>> >>> Are you saying to you require/rely on both of these series being >>> applied first ? >>> >>> [1]: >>> https://lore.kernel.org/all/af60c05b-4a0f-51b8-486a-1fc601602515@quicinc.com/ >>> [2]: >>> https://lore.kernel.org/all/20231016-dwc3-refactor-v1-0-ab4a84165470@quicinc.com/ >>> >>> Must be, nothing applies for me in this series. >> >> The first one is not a patch. It is just a discussion thread I started >> to get community's opinion before on disconnect interrupt handling. >> The current series is based on top of [2] made by Bjorn (as you >> already found out) and as I mentioned in cover letter of my series. >> > > Hi Bryan, > > Are you able to apply the series after including Bjorn's patches ? > Also can you confirm if the comments provided to your queries on [1] are > proper and if you have any other comments w.r.t probe deferral. > > [1]: > https://lore.kernel.org/all/e700133b-58f7-4a4d-8e5c-0d04441b789b@linaro.org/ > > Regards, > Krishna,
I wonder could you give a base SHA to apply the various series on ?
Your referenced precursor doesn't apply to usb-next
deckard@sagittarius-a:~/Development/qualcomm/qlt-kernel$ b4 shazam 20231016-dwc3-refactor-v1-0-ab4a84165470@quicinc.com Grabbing thread from lore.kernel.org/all/20231016-dwc3-refactor-v1-0-ab4a84165470@quicinc.com/t.mbox.gz Checking for newer revisions Grabbing search results from lore.kernel.org Analyzing 27 messages in the thread Checking attestation on all messages, may take a moment... --- [PATCH 1/12] dt-bindings: usb: qcom,dwc3: Add qcom,sc8180x-dwc3 [PATCH 2/12] usb: dwc3: qcom: Rename dwc3 platform_device reference + Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> [PATCH 3/12] usb: dwc3: qcom: Merge resources from urs_usb device [PATCH 4/12] usb: dwc3: Expose core driver as library [PATCH 5/12] usb: dwc3: Override end of dwc3 memory resource + Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> [PATCH 6/12] usb: dwc3: qcom: Add dwc3 core reference in driver state [PATCH 7/12] usb: dwc3: qcom: Instantiate dwc3 core directly [PATCH 8/12] usb: dwc3: qcom: Inline the qscratch constants + Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> [PATCH 9/12] dt-bindings: usb: qcom,dwc3: Rename to "glue" + Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> [PATCH 10/12] dt-bindings: usb: qcom,dwc3: Introduce flattened qcom,dwc3 binding [PATCH 11/12] usb: dwc3: qcom: Flatten the Qualcomm dwc3 binding and implementation [PATCH 12/12] arm64: dts: qcom: sc8180x: flatten usb_sec node --- ✗ No key: ed25519/quic_bjorande@quicinc.com --- NOTE: install dkimpy for DKIM signature verification --- Total patches: 12 --- Base: using specified base-commit 4d0515b235dec789578d135a5db586b25c5870cb Applying: dt-bindings: usb: qcom,dwc3: Add qcom,sc8180x-dwc3 Patch failed at 0001 dt-bindings: usb: qcom,dwc3: Add qcom,sc8180x-dwc3 When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". error: patch failed: Documentation/devicetree/bindings/usb/qcom,dwc3.yaml:29 error: Documentation/devicetree/bindings/usb/qcom,dwc3.yaml: patch does not apply hint: Use 'git am --show-current-patch=diff' to see the failed patch deckard@sagittarius-a:~/Development/qualcomm/qlt-kernel$ git diff deckard@sagittarius-a:~/Development/qualcomm/qlt-kernel$ git am --skip Applying: usb: dwc3: qcom: Rename dwc3 platform_device reference error: patch failed: drivers/usb/dwc3/dwc3-qcom.c:67 error: drivers/usb/dwc3/dwc3-qcom.c: patch does not apply Patch failed at 0002 usb: dwc3: qcom: Rename dwc3 platform_device reference hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". deckard@sagittarius-a:~/Development/qualcomm/qlt-kernel$ git am --skip Applying: usb: dwc3: qcom: Merge resources from urs_usb device error: patch failed: drivers/usb/dwc3/dwc3-qcom.c:68 error: drivers/usb/dwc3/dwc3-qcom.c: patch does not apply Patch failed at 0003 usb: dwc3: qcom: Merge resources from urs_usb device hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". deckard@sagittarius-a:~/Development/qualcomm/qlt-kernel$ git am --skip Applying: usb: dwc3: Expose core driver as library error: patch failed: drivers/usb/dwc3/core.c:1876 error: drivers/usb/dwc3/core.c: patch does not apply error: patch failed: drivers/usb/dwc3/core.h:1568 error: drivers/usb/dwc3/core.h: patch does not apply Patch failed at 0004 usb: dwc3: Expose core driver as library hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". deckard@sagittarius-a:~/Development/qualcomm/qlt-kernel$ git am --skip Applying: usb: dwc3: Override end of dwc3 memory resource error: patch failed: drivers/usb/dwc3/core.c:1908 error: drivers/usb/dwc3/core.c: patch does not apply Patch failed at 0005 usb: dwc3: Override end of dwc3 memory resource hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". deckard@sagittarius-a:~/Development/qualcomm/qlt-kernel$ git am --skip Applying: usb: dwc3: qcom: Add dwc3 core reference in driver state error: patch failed: drivers/usb/dwc3/dwc3-qcom.c:67 error: drivers/usb/dwc3/dwc3-qcom.c: patch does not apply Patch failed at 0006 usb: dwc3: qcom: Add dwc3 core reference in driver state hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". deckard@sagittarius-a:~/Development/qualcomm/qlt-kernel$ git am --abort
--- bod
| |