lkml.org 
[lkml]   [2023]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] mtd: spi-nor: stop printing superfluous debug info
From

cut

>>> Maybe we don't need this at all, as long as one message remains about
>>> the JEDEC ID, but keep in mind that spi-nors are commonly storing the
>>> rootfs and if your spi-nor does not boot you don't have a userspace yet
>>> and all the debugfs entries are purely useless.
>>
>> Good point.
>>
>> Just curious, do you know any boards which has the rootfs writable on
>> the spi-nor flash?
> I am also interested.
>

Having the rootfs stored on SPI NOR is a poor design decision as you're
better of with a NAND, which is cheaper and faster on writes. I tried in
the past a ubifs on top of a large (64 and 128MB) SPI NOR flash. But
they were plug-able flashes, not something that is always tied to the
board. Microchip's sama7g5ek comes with a 128MB macronix SPI NOR flash
populated. But there are other vendors that provide large SPI NORs if
really needed.

Cheers,
ta

\
 
 \ /
  Last update: 2023-11-28 10:40    [W:1.717 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site