lkml.org 
[lkml]   [2023]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [RFC PATCH 8/8] net: ethernet: mtk_eth_soc: add paths and SerDes modes for MT7988
From
Date
On Do, 2023-11-09 at 21:52 +0000, Daniel Golle wrote:
> MT7988 comes with a built-in 2.5G PHY as well as SerDes lanes to
> connect external PHYs or transceivers in USXGMII, 10GBase-R, 5GBase-R,
> 2500Base-X, 1000Base-X and Cisco SGMII interface modes.
>
> Implement support for configuring for the new paths to SerDes interfaces
> and the internal 2.5G PHY.
>
> Add USXGMII PCS driver for 10GBase-R, 5GBase-R and USXGMII mode, and
> setup the new PHYA on MT7988 to access the also still existing old
> LynxI PCS for 1000Base-X, 2500Base-X and Cisco SGMII PCS interface
> modes.
>
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> ---
[...]
> diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> index 9ae3b8a71d0e6..ba5998ef7965e 100644
> --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> @@ -15,6 +15,7 @@
> #include <linux/u64_stats_sync.h>
> #include <linux/refcount.h>
> #include <linux/phylink.h>
> +#include <linux/reset.h>

I can't see what this is required for?

regards
Philipp

\
 
 \ /
  Last update: 2023-11-27 14:28    [W:0.213 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site