lkml.org 
[lkml]   [2023]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 3/4] clk: sophgo: Add SG2042 clock generator driver
From

On 2023/11/27 15:12, Krzysztof Kozlowski wrote:
> On 27/11/2023 02:15, Chen Wang wrote:
>> From: Chen Wang <unicorn_wang@outlook.com>
>>
>> Add a driver for the SOPHGO SG2042 clock generator.
>>
>> Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
> ...
>
>> +static void __init sg2042_clk_init(struct device_node *node)
>> +{
>> + struct sg2042_clk_data *clk_data = NULL;
>> + int i, ret = 0;
>> + int num_clks = 0;
>> +
>> + num_clks = ARRAY_SIZE(sg2042_pll_clks) +
>> + ARRAY_SIZE(sg2042_div_clks) +
>> + ARRAY_SIZE(sg2042_gate_clks) +
>> + ARRAY_SIZE(sg2042_mux_clks);
>> + if (num_clks == 0) {
>> + ret = -EINVAL;
>> + goto error_out;
>> + }
>> +
>> + ret = sg2042_clk_init_clk_data(node, num_clks, &clk_data);
>> + if (ret < 0)
>> + goto error_out;
>> +
>> + ret = sg2042_clk_register_plls(clk_data, sg2042_pll_clks,
>> + ARRAY_SIZE(sg2042_pll_clks));
>> + if (ret)
>> + goto cleanup;
>> +
>> + ret = sg2042_clk_register_divs(clk_data, sg2042_div_clks,
>> + ARRAY_SIZE(sg2042_div_clks));
>> + if (ret)
>> + goto cleanup;
>> +
>> + ret = sg2042_clk_register_gates(clk_data, sg2042_gate_clks,
>> + ARRAY_SIZE(sg2042_gate_clks));
>> + if (ret)
>> + goto cleanup;
>> +
>> + ret = sg2042_clk_register_muxs(clk_data, sg2042_mux_clks,
>> + ARRAY_SIZE(sg2042_mux_clks));
>> + if (ret)
>> + goto cleanup;
>> +
>> + for (i = 0; i < num_clks; i++)
>> + dbg_info("provider [%d]: %s\n", i, clk_hw_get_name(clk_data->onecell_data.hws[i]));
>> + ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, &clk_data->onecell_data);
>> + if (ret)
>> + goto cleanup;
>> +
>> + return;
>> +
>> +cleanup:
>> + for (i = 0; i < num_clks; i++) {
>> + if (clk_data->onecell_data.hws[i] != NULL)
>> + clk_hw_unregister(clk_data->onecell_data.hws[i]);
>> + }
>> + kfree(clk_data);
>> +
>> +error_out:
>> + pr_err("%s failed error number %d\n", __func__, ret);
>> +}
>> +
>> +CLK_OF_DECLARE(sg2042_clk, "sophgo,sg2042-clkgen", sg2042_clk_init);
> No, this should be platform device. It's a child of another device, so
> you cannot use other way of init ordering.

hi, Krzysztof,

Thanks for your review.

I don't quite understand your opinion. Do you mean CLK_OF_DECLARE is
only used for platform device so it can not be use here? But I think
this driver is still for platform device though I move the clock
controller node as a child of the system contoller node. System
controller node is just a block of registers which are used to control
some other platform devices ,such as clock controller, reset controller
and pin controller for this SoC.

And I also see other similar code in kernel, for example:
drivers/clk/clk-k210.c.

And I'm confused by your input "so you cannot use other way of init
ordering." Do you mean "so you CAN use other way of init ordering"?
What's the other way of init ordering do you mean?

Thanks,

Chen

\
 
 \ /
  Last update: 2023-11-27 09:08    [W:0.053 / U:2.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site