lkml.org 
[lkml]   [2023]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes
> Just to be more precise qca807x can operate in 3 different mode:
> (this is controlled by the MODE_CFG bits)

> - QSGMII: 5 copper port

4 slots over QSGMII, plus the second SERDES is connected to the MAC
using SGMII/1000BaseX?

> - PSGMII: 5 copper port

5 slots over QSGMII, the second SERDES is idle?

> - PSGMII: 4 copper port + 1 combo (that can be both fiber or copper)

5 slots over QSGMII, with the second SERDES connected to an SFP cage.

Are ports 1-4 always connected to the P/Q SGMII. Its only port 5 which
can use the second SERDES?

Does changing between QSGMII and PSGMII really change the protocol run
over the multiplex link? The clock rate is slower, there are only 4
multiplexed slots vs five? Or does it keep using PSGMII and leaves one slot

I can see how it is messy to validate, if you only have phy-mode. So
maybe MODE_CFG is a package property. You then can validate the
phy-mode against MODE_CFG.

Andrew

\
 
 \ /
  Last update: 2023-11-23 15:27    [W:0.097 / U:1.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site