lkml.org 
[lkml]   [2023]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 2/5] RISC-V: Add SBI debug console helper routines
On Wed, Nov 22, 2023 at 4:15 AM Samuel Holland
<samuel.holland@sifive.com> wrote:
>
> Hi Anup,
>
> On 2023-11-17 9:38 PM, Anup Patel wrote:
> > Let us provide SBI debug console helper routines which can be
> > shared by serial/earlycon-riscv-sbi.c and hvc/hvc_riscv_sbi.c.
> >
> > Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> > ---
> > arch/riscv/include/asm/sbi.h | 5 +++++
> > arch/riscv/kernel/sbi.c | 43 ++++++++++++++++++++++++++++++++++++
> > 2 files changed, 48 insertions(+)
> >
> > diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
> > index 66f3933c14f6..ee7aef5f6233 100644
> > --- a/arch/riscv/include/asm/sbi.h
> > +++ b/arch/riscv/include/asm/sbi.h
> > @@ -334,6 +334,11 @@ static inline unsigned long sbi_mk_version(unsigned long major,
> > }
> >
> > int sbi_err_map_linux_errno(int err);
> > +
> > +extern bool sbi_debug_console_available;
> > +int sbi_debug_console_write(unsigned int num_bytes, phys_addr_t base_addr);
> > +int sbi_debug_console_read(unsigned int num_bytes, phys_addr_t base_addr);
> > +
> > #else /* CONFIG_RISCV_SBI */
> > static inline int sbi_remote_fence_i(const struct cpumask *cpu_mask) { return -1; }
> > static inline void sbi_init(void) {}
> > diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
> > index 5a62ed1da453..73a9c22c3945 100644
> > --- a/arch/riscv/kernel/sbi.c
> > +++ b/arch/riscv/kernel/sbi.c
> > @@ -571,6 +571,44 @@ long sbi_get_mimpid(void)
> > }
> > EXPORT_SYMBOL_GPL(sbi_get_mimpid);
> >
> > +bool sbi_debug_console_available;
> > +
> > +int sbi_debug_console_write(unsigned int num_bytes, phys_addr_t base_addr)
> > +{
> > + struct sbiret ret;
> > +
> > + if (!sbi_debug_console_available)
> > + return -EOPNOTSUPP;
> > +
> > + if (IS_ENABLED(CONFIG_32BIT))
> > + ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
> > + num_bytes, lower_32_bits(base_addr),
> > + upper_32_bits(base_addr), 0, 0, 0);
> > + else
> > + ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
> > + num_bytes, base_addr, 0, 0, 0, 0);
> > +
> > + return ret.error ? sbi_err_map_linux_errno(ret.error) : ret.value;
> > +}
> > +
> > +int sbi_debug_console_read(unsigned int num_bytes, phys_addr_t base_addr)
> > +{
> > + struct sbiret ret;
> > +
> > + if (!sbi_debug_console_available)
> > + return -EOPNOTSUPP;
> > +
> > + if (IS_ENABLED(CONFIG_32BIT))
> > + ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
> > + num_bytes, lower_32_bits(base_addr),
> > + upper_32_bits(base_addr), 0, 0, 0);
> > + else
> > + ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
> > + num_bytes, base_addr, 0, 0, 0, 0);
> > +
> > + return ret.error ? sbi_err_map_linux_errno(ret.error) : ret.value;
> > +}
>
> Since every place that calls these functions will need to do the vmalloc lookup,
> would it make sense to do it here, and have these take a pointer instead?

Yes, that's better. I will update.

Regards,
Anup

\
 
 \ /
  Last update: 2023-11-23 11:45    [W:2.765 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site