Messages in this thread | | | Date | Tue, 21 Nov 2023 14:30:41 +0100 | Subject | Re: [PATCH] ARM: dts: stm32: add STM32F746 syscfg clock | From | Alexandre TORGUE <> |
| |
Hi Ben
On 11/1/23 16:51, Ben Wolsieffer wrote: > The syscfg syscon was missing its clock, therefore any attempt to > read/write it after clk_disable_unused() silently failed. This was > preventing external pin interrupts from working if they were initialized > after this point. > > Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com> > --- > arch/arm/boot/dts/st/stm32f746.dtsi | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/boot/dts/st/stm32f746.dtsi b/arch/arm/boot/dts/st/stm32f746.dtsi > index 4942753d011e..cce6ab0e4617 100644 > --- a/arch/arm/boot/dts/st/stm32f746.dtsi > +++ b/arch/arm/boot/dts/st/stm32f746.dtsi > @@ -501,6 +501,7 @@ sdio1: mmc@40012c00 { > syscfg: syscon@40013800 { > compatible = "st,stm32-syscfg", "syscon"; > reg = <0x40013800 0x400>; > + clocks = <&rcc 0 STM32F7_APB2_CLOCK(SYSCFG)>; > }; > > exti: interrupt-controller@40013c00 {
Applied on stm32-next.
Thanks Alex
| |