Messages in this thread | | | From | Rob Herring <> | Subject | Re: [PATCH v2 1/2] dt-bindings: iio: frequency: add admfm2000 | Date | Tue, 21 Nov 2023 03:57:21 -0700 |
| |
On Tue, 21 Nov 2023 18:00:11 +0800, Kim Seer Paller wrote: > Dual microwave down converter module with input RF and LO frequency > ranges from 0.5 to 32 GHz and an output IF frequency range from 0.1 to > 8 GHz. It consists of a LNA, mixer, IF filter, DSA, and IF amplifier > for each down conversion path. > > Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com> > --- > V1 -> V2: Removed '|' after description. Specified the pins connected to > the GPIOs. Added additionalProperties: false. Changed node name to gpio. > Aligned < syntax with the previous syntax in the examples. > > .../bindings/iio/frequency/adi,admfm2000.yaml | 130 ++++++++++++++++++ > MAINTAINERS | 7 + > 2 files changed, 137 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml >
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors: ./Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml:14:5: [warning] wrong indentation: expected 2 but found 4 (indentation)
dtschema/dtc warnings/errors:
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231121100012.112861-1-kimseer.paller@analog.com
The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
| |