lkml.org 
[lkml]   [2023]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 06/12] iio: adc: ad9467: add mutex to struct ad9467_state
From: Nuno Sa <nuno.sa@analog.com>

When calling ad9467_set_scale(), multiple calls to ad9467_spi_write()
are done which means we need to properly protect the whole operation so
we are sure we will be in a sane state if two concurrent calls occur.

Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
---
drivers/iio/adc/ad9467.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c
index 04474dbfa631..91821dee03b7 100644
--- a/drivers/iio/adc/ad9467.c
+++ b/drivers/iio/adc/ad9467.c
@@ -4,7 +4,7 @@
*
* Copyright 2012-2020 Analog Devices Inc.
*/
-
+#include <linux/cleanup.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/device.h>
@@ -122,6 +122,8 @@ struct ad9467_state {
unsigned int output_mode;

struct gpio_desc *pwrdown_gpio;
+ /* protect against concurrent accesses to the device */
+ struct mutex lock;
};

static int ad9467_spi_read(struct spi_device *spi, unsigned int reg)
@@ -162,6 +164,7 @@ static int ad9467_reg_access(struct adi_axi_adc_conv *conv, unsigned int reg,
int ret;

if (!readval) {
+ guard(mutex)(&st->lock);
ret = ad9467_spi_write(spi, reg, writeval);
if (ret)
return ret;
@@ -310,6 +313,7 @@ static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2)
if (scale_val[0] != val || scale_val[1] != val2)
continue;

+ guard(mutex)(&st->lock);
ret = ad9467_spi_write(st->spi, AN877_ADC_REG_VREF,
info->scale_table[i][1]);
if (ret < 0)
--
2.42.1

\
 
 \ /
  Last update: 2023-11-21 11:18    [W:0.644 / U:2.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site