lkml.org 
[lkml]   [2023]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/2] hwmon: (nct6775) Fix fan speed set failure in automatic mode
Date
From: Xing Tong Wu <xingtong.wu@siemens.com>

Setting the fan speed is only valid in manual mode; it is not possible
to set the fan's speed in automatic mode.
Return error when attempting to set the fan speed in automatic mode.

Signed-off-by: Xing Tong Wu <xingtong.wu@siemens.com>
---
drivers/hwmon/nct6775-core.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/hwmon/nct6775-core.c b/drivers/hwmon/nct6775-core.c
index 88300fb99bb9..83f1da5acd22 100644
--- a/drivers/hwmon/nct6775-core.c
+++ b/drivers/hwmon/nct6775-core.c
@@ -2553,6 +2553,13 @@ store_pwm(struct device *dev, struct device_attribute *attr, const char *buf,
int err;
u16 reg;

+ /*
+ * The fan control mode should be set to manual if the user wants to adjust
+ * the fan speed. Otherwise, it will fail to set.
+ */
+ if (index == 0 && data->pwm_enable[nr] > manual)
+ return -EBUSY;
+
err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
--
2.25.1
\
 
 \ /
  Last update: 2023-11-21 09:16    [W:0.032 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site