lkml.org 
[lkml]   [2023]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFT PATCH 5/6] arm64: dts: qcom: sm6125: add interrupts to DWC3 USB controller
Maybe this should CC the people that have most recently worked on SM6125 and
related hardware?

On 2023-11-11 17:42:28, Krzysztof Kozlowski wrote:
> Add interrupts to SM6125 DWC3 USB controller, based on downstream/vendor
> code of Trinket DTSI from Xiaomi Laurel device, to fix dtbs_check
> warnings:
>
> sm6125-xiaomi-laurel-sprout.dtb: usb@4ef8800: 'interrupt-names' is a required property
> sm6125-xiaomi-laurel-sprout.dtb: usb@4ef8800: 'oneOf' conditional failed, one must be fixed:
> 'interrupts' is a required property
> 'interrupts-extended' is a required property
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Not tested on HW.

I have had an identical patch [1] on my tree for over one and a half years, but
recall not submitting it because of not being sure where to pull dm_hs_phy_irq /
dp_hs_phy_irq from. I think you are right (in the dt-bindings fixup) that it is
not available on this platform.

Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>

(and obviously tested)

[1]: https://github.com/somainline/linux/commit/b57f7fa80cb3f5cd2db3db2d79548cbf063056d9

> ---
> arch/arm64/boot/dts/qcom/sm6125.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> index eb07eca3a48d..1dd3a4056e26 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> @@ -1185,6 +1185,10 @@ usb3: usb@4ef8800 {
> <&gcc GCC_USB30_PRIM_MASTER_CLK>;
> assigned-clock-rates = <19200000>, <66666667>;
>
> + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hs_phy_irq", "ss_phy_irq";
> +
> power-domains = <&gcc USB30_PRIM_GDSC>;
> qcom,select-utmi-as-pipe-clk;
> status = "disabled";
> --
> 2.34.1
>

\
 
 \ /
  Last update: 2023-11-21 22:27    [W:0.059 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site