lkml.org 
[lkml]   [2023]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: Qualcomm Atheros QCA61x4 keeps drawing 0.85 W despite Bluetooth being disable in GNOME
From
Dear Alan, dear Hans,


Am 21.11.23 um 18:40 schrieb Alan Stern:
> On Tue, Nov 21, 2023 at 06:12:30PM +0100, Paul Menzel wrote:

>> Am 21.11.23 um 17:23 schrieb Alan Stern:
>>>> [340560.441957] usb 1-3: finish reset-resume
>>>> [340560.570940] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
>>>
>>> Those two lines are unexpected. Why does the device need to be reset?
>>> While the btusb module is loaded, does anything show up in
>>> /sys/bus/usb/devices/1-3/quirks?
>>
>> $ more /sys/bus/usb/devices/1-3/quirks
>> 0x2
>
> Ah. 0x2 is the RESET_RESUME quirk bit. The fact that it is on explains
> why the device gets reset when it is resumed.
>
> It also explains why the device isn't getting suspended. The USB core
> will not autosuspend a device that has the RESET_RESUME quirk if its
> driver wants remote-wakeup or does not support reset-resume. The btusb
> driver is like that.
>
> Apparently the RESET_RESUME quirk bit is set by the btusb driver itself
> (see the btusb_check_needs_reset_resume() routine in btusb.c), based on
> the computing platform rather than on the Bluetooth device. The
> btusb_needs_reset_resume_table[] contains three entries: Dell OptiPlex
> 3060, Dell XPS 9360, and Dell Inspiron 5565.
>
> Since your system is an XPS 9360, it has this problem with suspending
> the onboard Bluetooth device. The only way the kernel can deal with it
> is to avoid putting the device into runtime suspend while the driver
> module is loaded.
>
> So there's your answer. If you rebuild the btusb driver after removing
> the XPS 9360 entry from btusb_needs_reset_resume_table[], you should
> find that the device does get runtime suspended. (But then it might not
> operate properly if you try to turn it on again after it has been
> suspended.)

Thank you for finding this. This is commit 596b07a9a226 (Bluetooth:
btusb: Add Dell XPS 13 9360 to btusb_needs_reset_resume_table) from
April 2018 [1]. Hans, was it ever confirmed to be a platform limitation?
Does the Microsoft Windows driver do the same? Did the Dell engineers
verify it with the schematics? I was unable to see this in the bug
report [2].

Also, it would be nice, if Linux logged, if quirks are applied that
affect power usage.

As Alan wrote, that I’d need to rebuild the module to deactivate the
behavior, there is no switch to override the quirk table, right?

>>>> bmAttributes 0xe0
>>>> Self Powered
>>>> Remote Wakeup
>>>
>>> That's what I was interested in. The device does support remote wakeup.
>>
>> That would make sense so it can be resumed? (It does not necessarily mean
>> something like Wake-On-LAN, right?
>
> It _does_ mean something like Wake-On-LAN: The device is capable of
> asking the system to wake it up under some conditions while it or the
> system is suspended.
>
>> Also, for this device it’s disabled?
>>
>> $ grep . /sys/bus/usb/devices/1-3/power/wakeup
>> disabled
>
> Yes. You can change that setting by writing "enabled" to the sysfs
> file. But I don't think this will make any difference to your runtime
> suspend problem; the power/wakeup setting affects only system suspend,
> not runtime suspend.

Thank you again for the clarification.


Kind regards,

Paul


[1]:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=596b07a9a22656493726edf1739569102bd3e136
[2]: https://bugzilla.redhat.com/show_bug.cgi?id=1514836

\
 
 \ /
  Last update: 2023-11-21 21:04    [W:0.035 / U:1.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site