lkml.org 
[lkml]   [2023]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 6/9] thermal: exynos: stop using the threshold mechanism on Exynos 4210
Date
Exynos 4210 supports setting a base threshold value, which is added to
all trip points. This might be useful, but is not really necessary in
our usecase, so we always set it to 0 to simplify the code a bit.

Additionally, this change makes it so that we convert the value to the
calibrated one in a slightly different place. This is more correct
morally, though it does not make any change when single-point
calibration is being used (which is the case currently).

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
---
drivers/thermal/samsung/exynos_tmu.c | 17 +++--------------
1 file changed, 3 insertions(+), 14 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 3bdcbab7466f..d918bf6d5359 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -343,20 +343,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data,
int trip_id, u8 temp)
{
- struct thermal_trip trip;
- u8 ref, th_code;
-
- if (thermal_zone_get_trip(data->tzd, 0, &trip))
- return;
-
- ref = trip.temperature / MCELSIUS;
-
- if (trip_id == 0) {
- th_code = temp_to_code(data, ref);
- writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
- }
-
- temp -= ref;
+ temp = temp_to_code(data, temp);
writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip_id * 4);
}

@@ -371,6 +358,8 @@ static void exynos4210_tmu_initialize(struct platform_device *pdev)
struct exynos_tmu_data *data = platform_get_drvdata(pdev);

sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO));
+
+ writeb(0, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
}

static void exynos4412_tmu_set_trip_temp(struct exynos_tmu_data *data,
--
2.42.0
\
 
 \ /
  Last update: 2023-11-20 15:53    [W:0.131 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site