lkml.org 
[lkml]   [2023]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: spi: imx: Increase imx51 ecspi burst length fails on imx6dl and imx8mm
On Mon, Nov 20, 2023 at 10:33:38AM +0100, linux@bigler.io wrote:
> I run the test and it worked fine. The transmitted data matches with
> the recived data, no diff.
ok, thanks for confirming. At least we are on the same page.

> BUT!!! on the MDIO it is completly different !!!
> When I request to send 4kB Data I measure on the line 16384Byte.
>
> The data is again 3Dummy Bytes followed by the databyte.
> So the error symetic on send and recive

ok, that's annoying. I wonder if the loopback test could be improved to
spot such kind of issues, maybe we could verify if the execution time
is reasonable given the SPI clock frequency and the payload size ...

Francesco

\
 
 \ /
  Last update: 2023-11-20 14:05    [W:0.096 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site