lkml.org 
[lkml]   [2023]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] PCI: Ignore PCIe ports used for tunneling in pcie_bandwidth_available()
On Thu, Nov 02, 2023 at 10:26:31AM -0500, Mario Limonciello wrote:
> On 11/2/2023 10:21, Lukas Wunner wrote:
> > On Wed, Nov 01, 2023 at 08:14:31PM -0500, Mario Limonciello wrote:
> > > Considering this I think it's a good idea to move that creation of the
> > > device link into drivers/pci/pci-acpi.c and store a bit in struct
> > > pci_device to indicate it's a tunneled port.
> > >
> > > Then 'thunderbolt' can look for this directly instead of walking all
> > > the FW nodes.
> > >
> > > pcie_bandwidth_available() can just look at the tunneled port bit
> > > instead of the existence of the device link.
> >
> > pci_is_thunderbolt_attached() should already be doing exactly what
> > you want to achieve with the new bit. It tells you whether a PCI
> > device is behind a Thunderbolt tunnel. So I don't think a new bit
> > is actually needed.
>
> It's only for a device connected to an Intel TBT3 controller though; it
> won't apply to USB4.

Time to resurrect this patch here...? :)

https://lore.kernel.org/all/20220204182820.130339-3-mario.limonciello@amd.com/

\
 
 \ /
  Last update: 2023-11-02 16:36    [W:0.285 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site