Messages in this thread | | | Date | Sat, 18 Nov 2023 16:36:54 +0100 | From | Andrew Lunn <> | Subject | Re: [PATCH 9/9] dt-bindings: net: ipq4019-mdio: Document ipq5332 platform |
| |
> The clock arguments are provided in the later part as below. i will also > provide more detail clock names for the new added clocks for the ipq5332 > platform in description. > > - if: > > properties: > > compatible: > > contains: > > enum: > > - qcom,ipq5332-mdio > > then: > > properties: > > clocks: > > items: > > - description: MDIO clock source frequency fixed to 100MHZ > > - description: UNIPHY0 AHB clock source frequency fixed to > 100MHZ > - description: UNIPHY0 SYS clock source frequency fixed to 24MHZ > - description: UNIPHY1 AHB clock source frequency fixed to > 100MHZ > - description: UNIPHY1 SYS clock source frequency fixed to 24MHZ
As i said before, the frequency of the clocks does not matter here. That appears to be the drivers problem. I assume every board design, with any sort of PHY, needs the same clock configuration?
Andrew
| |