lkml.org 
[lkml]   [2023]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 5/7] media: qcom: camss: Add support for named power-domains
From
On 3.11.2023 13:29, Bryan O'Donoghue wrote:
> Right now we use fixed indexes to assign power-domains, with a
> requirement for the TOP GDSC to come last in the list.
>
> Adding support for named power-domains means the declaration in the dtsi
> can come in any order.
>
> After this change we continue to support the old indexing - if a SoC
> resource declaration or the in-use dtb doesn't declare power-domain names
> we fall back to the default legacy indexing.
>
> From this point on though new SoC additions should contain named
> power-domains, eventually we will drop support for legacy indexing.
>
> Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
rg -l "&cc.* \{" arch/arm64/boot/dts/qcom # (the bus is named cci or cciN)

arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts
arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts
arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts

the FP4 only has bus enablements (i.e. no attached sensors)
the number of working DB845c/RB3s is probably single-digit today

410c and rb5 are probably legit users.. part of me would like to
get rid of this messy old binding ASAP.. but then are there really
non-Bryans with these boards and the camera mezzs?

Konrad

\
 
 \ /
  Last update: 2023-11-20 14:04    [W:0.089 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site