lkml.org 
[lkml]   [2023]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/14] spi: axi-spi-engine: remove completed_id from driver state
Date
In the AXI SPI Engine driver, the completed_id field in the driver
state is only used in one function and the value does not need to
persist between function calls. Therefore, it can be removed from the
driver state and made a local variable in the function where it is used.

Signed-off-by: David Lechner <dlechner@baylibre.com>
---
drivers/spi/spi-axi-spi-engine.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c
index 210bea23f433..120001dbc4dc 100644
--- a/drivers/spi/spi-axi-spi-engine.c
+++ b/drivers/spi/spi-axi-spi-engine.c
@@ -115,7 +115,6 @@ struct spi_engine {

struct spi_message *msg;
struct ida sync_ida;
- unsigned int completed_id;

unsigned int int_enable;
};
@@ -380,13 +379,14 @@ static irqreturn_t spi_engine_irq(int irq, void *devid)
struct spi_engine *spi_engine = spi_controller_get_devdata(host);
unsigned int disable_int = 0;
unsigned int pending;
+ int completed_id = -1;

pending = readl_relaxed(spi_engine->base + SPI_ENGINE_REG_INT_PENDING);

if (pending & SPI_ENGINE_INT_SYNC) {
writel_relaxed(SPI_ENGINE_INT_SYNC,
spi_engine->base + SPI_ENGINE_REG_INT_PENDING);
- spi_engine->completed_id = readl_relaxed(
+ completed_id = readl_relaxed(
spi_engine->base + SPI_ENGINE_REG_SYNC_ID);
}

@@ -410,7 +410,7 @@ static irqreturn_t spi_engine_irq(int irq, void *devid)
if (pending & SPI_ENGINE_INT_SYNC && spi_engine->msg) {
struct spi_engine_message_state *st = spi_engine->msg->state;

- if (spi_engine->completed_id == st->sync_id) {
+ if (completed_id == st->sync_id) {
struct spi_message *msg = spi_engine->msg;

msg->status = 0;
--
2.42.0

\
 
 \ /
  Last update: 2023-11-20 14:03    [W:0.081 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site