lkml.org 
[lkml]   [2023]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v6 5/6] dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup
The Linked list element and pointer are not stored in the same memory as
the HDMA controller register. If the doorbell register is toggled before
the full write of the linked list a race condition error will occur.
In remote setup we can only use a readl to the memory to assure the full
write has occurred.

Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---

Changes in v2:
- Move the sync read in a function.
- Add commments

Changes in v4:
- Update git commit message.

Changes in v6:
- Fix comment typos.
---
drivers/dma/dw-edma/dw-hdma-v0-core.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
index 04b0bcb6ded9..10e8f0715114 100644
--- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
+++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
@@ -222,6 +222,20 @@ static void dw_hdma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
dw_hdma_v0_write_ll_link(chunk, i, control, chunk->ll_region.paddr);
}

+static void dw_hdma_v0_sync_ll_data(struct dw_edma_chunk *chunk)
+{
+ /*
+ * In case of remote HDMA engine setup, the DW PCIe RP/EP internal
+ * configuration registers and application memory are normally accessed
+ * over different buses. Ensure LL-data reaches the memory before the
+ * doorbell register is toggled by issuing the dummy-read from the remote
+ * LL memory in a hope that the MRd TLP will return only after the
+ * last MWr TLP is completed
+ */
+ if (!(chunk->chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL))
+ readl(chunk->ll_region.vaddr.io);
+}
+
static void dw_hdma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
{
struct dw_edma_chan *chan = chunk->chan;
@@ -252,6 +266,9 @@ static void dw_hdma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
/* Set consumer cycle */
SET_CH_32(dw, chan->dir, chan->id, cycle_sync,
HDMA_V0_CONSUMER_CYCLE_STAT | HDMA_V0_CONSUMER_CYCLE_BIT);
+
+ dw_hdma_v0_sync_ll_data(chunk);
+
/* Doorbell */
SET_CH_32(dw, chan->dir, chan->id, doorbell, HDMA_V0_DOORBELL_START);
}
--
2.25.1

\
 
 \ /
  Last update: 2023-11-20 14:02    [W:1.533 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site