Messages in this thread | | | Date | Fri, 17 Nov 2023 17:59:51 +0800 | Subject | Re: [PATCH 3/9] net: mdio: ipq4019: Enable GPIO reset for ipq5332 platform | From | Jie Luo <> |
| |
On 11/17/2023 1:20 AM, Andrew Lunn wrote: >> FYI, here is the sequence to bring up qca8084. >> a. enable clock output to qca8084. >> b. do gpio reset of qca8084. >> c. customize MDIO address and initialization configurations. >> d. the PHY ID can be acquired. > > This all sounds like it is specific to the qca8084, so it should be in > the driver for the qca8084. > > Its been pointed out you can get the driver to load by using the PHY > ID in the compatible. You want the SoC clock driver to export a CCF > clock, which the PHY driver can use. The PHY driver should also be > able to get the GPIO. So i think the PHY driver can do all this. > > Andrew
Yes, Andrew, that is feasible, i will update the patches to move the initialized clock configs in the PHY probe function.
| |