Messages in this thread Patch in this message | | | From | Javier Martinez Canillas <> | Subject | [PATCH 3/3] drm/ssd130x: Change "solomon,page-offset" property default value | Date | Thu, 16 Nov 2023 19:07:39 +0100 |
| |
This is used to specify the page start address offset of the display RAM.
The value is used as offset when setting the page start address with the SSD130X_SET_PAGE_RANGE command, and the driver currently sets its value to 1 if the property is not present in the Device Tree.
But the datasheet mentions that the value on reset for the page start is a 0, so it makes more sense to also have 0 as the default value for the page offset if the property is not present.
In fact, using a default value of 1 leads to the display not working when the emulated fbdev is attached to the framebuffer console.
Reported-by: Sahaj Sarup <sahaj.sarup@linaro.org> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> ---
drivers/gpu/drm/solomon/ssd130x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c index bef293922b98..8944129a8e0b 100644 --- a/drivers/gpu/drm/solomon/ssd130x.c +++ b/drivers/gpu/drm/solomon/ssd130x.c @@ -1453,7 +1453,7 @@ static void ssd130x_parse_properties(struct ssd130x_device *ssd130x) ssd130x->height = ssd130x->device_info->default_height; if (device_property_read_u32(dev, "solomon,page-offset", &ssd130x->page_offset)) - ssd130x->page_offset = 1; + ssd130x->page_offset = 0; if (device_property_read_u32(dev, "solomon,col-offset", &ssd130x->col_offset)) ssd130x->col_offset = 0; -- 2.41.0
| |