lkml.org 
[lkml]   [2023]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] soundwire: amd: add an error code check in amd_sdw_clock_stop_exit
From
On 16/11/23 01:21, Pierre-Louis Bossart wrote:
>>>> diff --git a/drivers/soundwire/amd_manager.c b/drivers/soundwire/amd_manager.c
>>>> index 3a99f6dcdfaf..f391b541f4b7 100644
>>>> --- a/drivers/soundwire/amd_manager.c
>>>> +++ b/drivers/soundwire/amd_manager.c
>>>> @@ -1029,6 +1029,10 @@ static int amd_sdw_clock_stop_exit(struct amd_sdw_manager *amd_manager)
>>>> ret = readl_poll_timeout(amd_manager->mmio + ACP_SW_CLK_RESUME_CTRL, val,
>>>> (val & AMD_SDW_CLK_RESUME_DONE), ACP_DELAY_US,
>>>> AMD_SDW_TIMEOUT);
>>>> + if (ret)
>>>> + dev_err(amd_manager->dev, "%s: timed out: %pe\n", __func__,
>>>> + ERR_PTR(ret));
>>> Is this really the desired behavior?
>>>
>>> This patch fixes the static analysis issue by logging the error code,
>>> but does it make sense to continue resuming here and trying to exit from
>>> the clock stop mode?
>>>
>>> At this point a bus reset might be a more relevant behavior...
>> As per earlier discussion, when we sent the initial patch series,
>> It was communicated that even clock stop sequence fails,
>> return '0' in suspend/resume callbacks that why we returned
>> status as zero.
> clock stop is for suspend and clock stop exit for resume. Different
> problems.
>
>> In this scenario, it's not continuing resume when clock stop exit
>> sequence fails. Even In Intel's case, if the clock stop sequence fails,
>> just code is exiting from that sequence.
> that's right, in the Intel SoundWire drivers we never prevent the
> pm_runtime suspend from happening, and discard any errors. In the resume
> step we do a bus reset anyways.
>
> But that's different here, this is the clock stop exit which happens on
> resume and IIRC there is no bus reset. If the resume fails, what is the
> expected behavior? If you keep going then you are going to have other
> issues down the road.
We will check and come back on clock stop exit sequence failure
adding bus reset sequence.
>>>> if (val & AMD_SDW_CLK_RESUME_DONE) {
>>>> writel(0, amd_manager->mmio + ACP_SW_CLK_RESUME_CTRL);
>>>> ret = sdw_bus_exit_clk_stop(&amd_manager->bus);

\
 
 \ /
  Last update: 2023-11-20 14:01    [W:0.037 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site