lkml.org 
[lkml]   [2023]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 8/9] net: mdio: ipq4019: add qca8084 configurations
From


On 11/16/2023 12:20 AM, Andrew Lunn wrote:
> On Wed, Nov 15, 2023 at 11:25:14AM +0800, Luo Jie wrote:
>> The PHY & PCS clocks need to be enabled and the reset
>> sequence needs to be completed to make qca8084 PHY
>> probeable by MDIO bus.
>
> Is all this guaranteed to be the same between different boards? Can
> the board be wired differently and need a different configuration?
>
> Andrew

Hi Andrew,
This configuration sequence is specified to the qca8084 chip,
not related with the platform(such as ipq5332).

All these configured registers are located in qca8084 chip, we need
to complete these configurations to make MDIO bus being able to
scan the qca8084 PHY(PHY registers can be accessed).

\
 
 \ /
  Last update: 2023-11-20 14:01    [W:0.103 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site