lkml.org 
[lkml]   [2023]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v7 0/3] PCI: brcmstb: Configure appropriate HW CLKREQ# mode
From
On 11/9/23 11:13, Jim Quinlan wrote:
> v7 -- Manivannan Sadhasivam suggested (a) making the property look like a
> network phy-mode and (b) keeping the code simple (not counting clkreq
> signal appearances, un-advertising capabilites, etc). This is
> what I have done. The property is now "brcm,clkreq-mode" and
> the values may be one of "safe", "default", and "no-l1ss". The
> default setting is to employ the most capable power savings mode.
>
> v6 -- No code has been changed.
> -- Changed commit subject and comment in "#PERST" commit (Bjorn, Cyril)
> -- Changed sign-off and author email address for all commits.
> This was due to a change in Broadcom's upstreaming policy.
>
> v5 -- Remove DT property "brcm,completion-timeout-us" from
> "DT bindings" commit. Although this error may be reported
> as a completion timeout, its cause was traced to an
> internal bus timeout which may occur even when there is
> no PCIe access being processed. We set a timeout of four
> seconds only if we are operating in "L1SS CLKREQ#" mode.
> -- Correct CEM 2.0 reference provided by HW engineer,
> s/3.2.5.2.5/3.2.5.2.2/ (Bjorn)
> -- Add newline to dev_info() string (Stefan)
> -- Change variable rval to unsigned (Stefan)
> -- s/implementaion/implementation/ (Bjorn)
> -- s/superpowersave/powersupersave/ (Bjorn)
> -- Slightly modify message on "PERST#" commit.
> -- Rebase to torvalds master
>
> v4 -- New commit that asserts PERST# for 2711/RPi SOCs at PCIe RC
> driver probe() time. This is done in Raspian Linux and its
> absence may be the cause of a failing test case.
> -- New commit that removes stale comment.
>
> v3 -- Rewrote commit msgs and comments refering panics if L1SS
> is enabled/disabled; the code snippet that unadvertises L1SS
> eliminates the panic scenario. (Bjorn)
> -- Add reference for "400ns of CLKREQ# assertion" blurb (Bjorn)
> -- Put binding names in DT commit Subject (Bjorn)
> -- Add a verb to a commit's subject line (Bjorn)
> -- s/accomodat(\w+)/accommodat$1/g (Bjorn)
> -- Rewrote commit msgs and comments refering panics if L1SS
> is enabled/disabled; the code snippet that unadvertises L1SS
> eliminates the panic scenario. (Bjorn)
>
> v2 -- Changed binding property 'brcm,completion-timeout-msec' to
> 'brcm,completion-timeout-us'. (StefanW for standard suffix).
> -- Warn when clamping timeout value, and include clamped
> region in message. Also add min and max in YAML. (StefanW)
> -- Qualify description of "brcm,completion-timeout-us" so that
> it refers to PCIe transactions. (StefanW)
> -- Remvove mention of Linux specifics in binding description. (StefanW)
> -- s/clkreq#/CLKREQ#/g (Bjorn)
> -- Refactor completion-timeout-us code to compare max and min to
> value given by the property (as opposed to the computed value).
>
> v1 -- The current driver assumes the downstream devices can
> provide CLKREQ# for ASPM. These commits accomodate devices
> w/ or w/o clkreq# and also handle L1SS-capable devices.
>
> -- The Raspian Linux folks have already been using a PCIe RC
> property "brcm,enable-l1ss". These commits use the same
> property, in a backward-compatible manner, and the implementaion
> adds more detail and also automatically identifies devices w/o
> a clkreq# signal, i.e. most devices plugged into an RPi CM4
> IO board.

For the entire series:

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>

on all of my available devices:

- SUNIX Co., Ltd. Multiport serial controller
- Broadcom BCM4331 Wi-Fi
- Broadcom BCM43224 Wi-Fi
- Broadcom BCM4322 Wi-Fi
- Qualcomm Atheros AR5008
- Broadcom BCM4366 Wi-Fi
- Marvell Technology Group Ltd. 88SE9125 PCIe SATA 6.0 Gb/s controller
- Intel 7260 Wi-Fi
- Intel Corporation 82574L Gigabit Network Connection
- Broadcom NetXtreme BCM5751 Gigabit Ethernet
- Pepperl+Fuchs RocketPort EXPRESS 8-port w/Octa Cable
- Micron/Crucial Technology P2 NVMe PCIe SSD
- ASM1184e PCIe Switch Port
--
Florian

[unhandled content-type:application/pkcs7-signature]
\
 
 \ /
  Last update: 2023-11-20 13:58    [W:3.789 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site