Messages in this thread Patch in this message | | | From | Krzysztof Kozlowski <> | Subject | [PATCH 3/3] ARM: dts: qcom: ipq4019: correct clock order in DWC3 node | Date | Sun, 12 Nov 2023 09:01:36 +0100 |
| |
Align the order of clocks in Qualcomm DWC3 USB controller to match bindings. Linux driver does not care about the order. This fixes dtbs_check warning:
qcom-ipq4018-ap120c-ac.dtb: usb@60f8800: clock-names:0: 'core' was expected
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi index b93c7efda827..6357cd342b33 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi @@ -684,7 +684,7 @@ usb2: usb@60f8800 { clocks = <&gcc GCC_USB2_MASTER_CLK>, <&gcc GCC_USB2_SLEEP_CLK>, <&gcc GCC_USB2_MOCK_UTMI_CLK>; - clock-names = "master", "sleep", "mock_utmi"; + clock-names = "core", "sleep", "mock_utmi"; ranges; status = "disabled"; -- 2.34.1
| |