lkml.org 
[lkml]   [2023]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] pinctrl: aspeed: Allow changing SPI mode from hardware strap defaults
From
Date
On Wed, 2023-10-04 at 20:08 -0700, Zev Weiss wrote:
> Some platforms unfortunately have their SPI mode selection bits
> strapped incorrectly (such as being configured for passthrough mode
> when master mode is in fact the only useful configuration for it) and
> thus require correction in software. Add the SPI mode bits to the
> GPIO passthrough bits as the exceptions to the read-only rule for the
> hardware strap register so that the pinctrl subsystem can be used for
> such corrections.
>
> Signed-off-by: Zev Weiss <zev@bewilderbeest.net>

Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>

Thanks!

\
 
 \ /
  Last update: 2023-10-05 18:04    [W:0.261 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site