lkml.org 
[lkml]   [2023]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 08/12] net: ethernet: stmmac: stm32: support the phy-supply regulator binding
From

On 9/28/23 17:45, Ben Wolsieffer wrote:
> Hello,
>
> On Thu, Sep 28, 2023 at 05:15:08PM +0200, Christophe Roullier wrote:
>> From: Christophe Roullier <christophe.roullier@st.com>
>>
>> Configure the phy regulator if defined by the "phy-supply" DT phandle.
>>
>> Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
>> ---
>> .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 51 ++++++++++++++++++-
>> 1 file changed, 50 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
>> index 72dda71850d75..31e3abd2caeaa 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
> ... snip ...
>> static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
>> @@ -455,12 +496,20 @@ static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
>> if (dwmac->enable_eth_ck)
>> clk_disable_unprepare(dwmac->clk_eth_ck);
>>
>> + /* Keep the PHY up if we use Wake-on-Lan. */
>> + if (!device_may_wakeup(dwmac->dev))
>> + phy_power_on(dwmac, false);
>> +
>> return ret;
>> }
>>
>> static void stm32mp1_resume(struct stm32_dwmac *dwmac)
>> {
>> clk_disable_unprepare(dwmac->clk_ethstp);
>> +
>> + /* The PHY was up for Wake-on-Lan. */
>> + if (!device_may_wakeup(dwmac->dev))
>> + phy_power_on(dwmac, true);
>> }
>>
>> static int stm32mcu_suspend(struct stm32_dwmac *dwmac)
> Why only turn off the regulator in suspend on the STM32MP1 and not STM32
> MCUs? It seems like this could just go in stm32_dwmac_suspend/resume().
>
> Selfishly, I have a use case for this on an STM32F746 platform, so I
> would like to see support for it and would test an updated version.
>
Hi,

I'm working on MPU boards, I do not have MCU board, so feel free to
contribute on MCU part ;-)

Thanks

Christophe

>> --
>> 2.25.1
>>
> Thanks, Ben

\
 
 \ /
  Last update: 2023-10-05 16:43    [W:0.056 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site